customized-message
Use this command to configure replacement messages.
When the FortiMail unit detects a virus in an email attachment, it replaces the attachment with a message that provides information about the virus and source of the email.
The FortiMail unit may also use replacement messages when notifying a recipient that it has blocked an email as spam or due to content filtering, or when sending a quarantine report.
You can customize the secure message notifications that secure email recipients receive when IBE encrypted email are sent to them, and configure simple network management protocol (SNMP) settings.
Syntax
This command contains many sub-commands. Each sub-command, linked in the table below, is documented in subsequent sections.
config customized-message
edit <message_name>
next
end
|
Variable |
Description |
Default |
|
Select the replacement message that you want to customize. The message names include: ibe-notify-account-expiry-alert ibe-notify-password-reset-done |
|
Related topics
alert-email
Use this sub-command to configure the variables and the default email template of the alert email.
Syntax
This sub-command is available from within the command customized-message.
edit alert-email
config variable
edit <name>
set content
set display-name
config email-template
edit default
set from <string>
set subject <string>
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the email body in HTML code. |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the email body in text format. |
|
as-sender-rate-notify
Use this sub-command to configure the variables and the default email template of the notifications for spam sender’s sending rate.
Syntax
This sub-command is available from within the command customized-message.
edit as-sender-rate-notify
config variable
edit <name>
set content
set display-name
config email-template
edit default
set from <string>
set subject <string>
set to <string>
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the email Envelope From field. |
|
|
|
Enter the replacement message for the email From field. |
|
|
|
Enter the replacement email body in HTML format. |
|
|
|
Enter the replacement message for the email Subject header. |
|
|
|
Enter the replacement email body in text format. |
|
|
|
Enter the replacement message for the email To field. |
|
attachment-filtering-notify
Use this sub-command to configure the variables and the default email template of the notification for attachment filtering.
Syntax
This sub-command is available from within the command customized-message.
edit attachment-filtering-notify
config variable
edit <name>
set content
set display-name
config email-template
edit default
set env-from
set env-to
set from <string>
set html-body <string>
set subject <string>
set text-body <string>
set to <string>
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
| env-from <string> | Enter the replacement message for the email Envelope From field. |
|
| env-to <string> | Enter the replacement message for the email Envelope To field. |
|
| from <string> | Enter the replacement message for the email From field. |
|
|
html-body <string> |
Enter the replacement email body in HTML format. |
|
|
subject <string> |
Enter the replacement message for the email Subject header. |
|
|
text-body <string> |
Enter the replacement email body in text format. |
|
| to <string> | Enter the replacement message for the email To field. |
|
content-disarm-reconstruct
Use this sub-command to configure the variables and the default content of the notification message for Office and/or PDF attachment content disarm and reconstruction (CDR).
Syntax
This sub-command is available from within the command customized-message.
edit content-disarm-reconstruct
config variable
edit <name>
set content
set display-name
config message
edit default
set content <string>
set format {html | multiline | text}
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the webmail login. |
|
|
|
Select the format for the webmail login. |
html |
custom-webmail-login
Use this sub-command to configure the variables and the default content of the webmail login.
Syntax
This sub-command is available from within the command customized-message.
edit custom-webmail-login
config variable
edit <name>
set content
set display-name
config message
edit default
set content <string>
set format {html | multiline | text}
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the webmail login. |
|
|
|
Select the format for the webmail login. |
html |
disclaimer-insertion
Use this sub-command to configure the variables and the default content of the disclaimer insertion message.
Syntax
This sub-command is available from within the command customized-message.
edit disclaimer-insertion
config variable
edit <name>
set content
set display-name
config message
edit default
set content <string>
set format {html | multiline | text}
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the webmail login. |
|
|
|
Select the format for the webmail login. |
html |
email-template-av-repack
Use this sub-command to configure the variables and the default content of the email template for antivirus action.
Syntax
This sub-command is available from within the command customized-message.
edit email-template-av-repack
config variable
edit <name>
set content
set display-name
config email-template
edit default
set from <string>
set subject <string>
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the email From field. |
|
|
|
Enter the replacement email body in HTML format. |
|
|
|
Enter the replacement message for the email Subject field. |
|
|
|
Enter the replacement email body in text format. |
|
email-template-notify-generic
Use this sub-command to configure the variables and the default content of the email template for generic notifications.
Syntax
This sub-command is available from within the command customized-message.
edit email-template-notify-generic
config variable
edit <name>
set content
set display-name
config email-template
edit default
set from <string>
set subject <string>
set to <string>
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the email Envelope From field. |
|
|
|
Enter the replacement message for the email From field. |
|
|
|
Enter the replacement email body in HTML format. |
|
|
|
Enter the replacement message for the email Subject header. |
|
|
|
Enter the replacement email body in text format. |
|
|
|
Enter the replacement message for the email To field. |
|
ibe-login-page
Use this sub-command to configure the variables and the default replacement message for the custom IBE login page.
Syntax
This sub-command is available from within the command customized-message.
edit ibe-login-page
config variable
edit <name>
set content
set display-name
config message
edit default
set content <string>
set format {html | multiline | text}
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for suspicious email attachments. |
|
|
|
Select the format for the replacement message of suspicious email attachments. |
text |
ibe-notify-account-delete
Use this sub-command to configure the variables and the default email template of the IBE account delete notification.
Syntax
This sub-command is available from within the command customized-message.
edit ibe-notify-account-delete
config variable
edit <name>
set content
set display-name
config email-template
edit default
set from <string>
set html-body <string>
set subject <string>
set text-body <string>
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in HTML code. |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in text format. |
|
ibe-notify-account-expiry
Use this sub-command to configure the variables and the default email template of the IBE account expiry notification.
Syntax
This sub-command is available from within the command customized-message.
edit ibe-notify-account-expiry
config variable
edit <name>
set content
set display-name
config email-template
edit default
set from <string>
set html-body <string>
set subject <string>
set text-body <string>
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in HTML code. |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in text format. |
|
ibe-notify-account-expiry-alert
Use this sub-command to configure the variables and the default email template of the IBE account expiry alert notification.
Syntax
This sub-command is available from within the command customized-message.
edit ibe-notify-account-expiry-alert
config variable
edit <name>
set content
set display-name
config email-template
edit default
set from <string>
set html-body <string>
set subject <string>
set text-body <string>
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in HTML code. |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in text format. |
|
ibe-notify-account-lock
Use this sub-command to configure the variables and the default email template of the IBE account lock notification.
Syntax
This sub-command is available from within the command customized-message.
edit ibe-notify-account-lock
config variable
edit <name>
set content
set display-name
config email-template
edit default
set from <string>
set html-body <string>
set subject <string>
set text-body <string>
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in HTML code. |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in text format. |
|
ibe-notify-account-reset
Use this sub-command to configure the variables and the default email template of the IBE account reset notification.
Syntax
This sub-command is available from within the command customized-message.
edit ibe-notify-account-reset
config variable
edit <name>
set content
set display-name
config email-template
edit default
set from <string>
set subject <string>
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in HTML code. |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in text format. |
|
ibe-notify-account-reset-done
Use this sub-command to configure the variables and the default email template of the IBE account reset completion notification.
Syntax
This sub-command is available from within the command customized-message.
edit ibe-notify-account-reset-done
config variable
edit <name>
set content
set display-name
config email-template
edit default
set from <string>
set global-bayesian {enable | disable}
set subject <string>
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in HTML code. |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in text format. |
|
ibe-notify-activation
Use this sub-command to configure the variables and the default email template for the account activation notification.
Syntax
This sub-command is available from within the command customized-message.
edit ibe-notify-activation
config variable
edit <name>
set content
set display-name
config email-template
edit default
set env-from <string>
set from <string>
set html-body <string>
set subject <string>
set text-body <string>
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
env-from <string> |
Enter the replacement message for the |
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in HTML code. |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in text format. |
|
ibe-notify-config-change
Use this sub-command to configure the variables and the default email template of the IBE account security settings changed notification.
Syntax
This sub-command is available from within the command customized-message.
edit ibe-notify-config-change
config variable
edit <name>
set content
set display-name
config email-template
edit default
set from <string>
set html-body <string>
set subject <string>
set text-body <string>
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in HTML code. |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in text format. |
|
ibe-notify-password-reset
Use this sub-command to configure the variables and the default email template of the IBE password reset notification.
Syntax
This sub-command is available from within the command customized-message.
edit ibe-notify-password-reset
config variable
edit <name>
set content
set display-name
config email-template
edit default
set from <string>
set subject <string>
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in HTML code. |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in text format. |
|
ibe-notify-password-reset-done
Use this sub-command to configure the variables and the default email template of the IBE password reset completion notification.
Syntax
This sub-command is available from within the command customized-message.
edit ibe-notify-password-reset-done
config variable
edit <name>
set content
set display-name
config email-template
edit default
set from <string>
set subject <string>
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in HTML code. |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in text format. |
|
ibe-notify-pull-message
Use this sub-command to configure the variables and the default email template of the secure message notification containing a link which the Webmail users can click to read the message.
Syntax
This sub-command is available from within the command customized-message.
edit ibe-notify-pull-message
config variable
edit <name>
set content
set display-name
config email-template
edit default
set from <string>
set subject <string>
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in HTML code. |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in text format. |
|
ibe-notify-push-message
Use this sub-command to configure the variables and the default email template of the secure message notification with an attachment containing the secure message.
Syntax
This sub-command is available from within the command customized-message.
edit ibe-notify-push-message
config variable
edit <name>
set content
set display-name
config email-template
edit default
set from <string>
set subject <string>
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in HTML code. |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in text format. |
|
ibe-notify-user-register-done
Use this sub-command to configure the variables and the default email template of the IBE user registration notification.
Syntax
This sub-command is available from within the command customized-message.
edit ibe-notify-user-register-done
config variable
edit <name>
set content
set display-name
config email-template
edit default
set from <string>
set subject <string>
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in HTML code. |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in text format. |
|
ibe-notify-wread-notif
Use this sub-command to configure the variables and the default email template of the IBE “read” notification which is the first time the message is read.
Syntax
This sub-command is available from within the command customized-message.
edit ibe-notify-wread-notif
config variable
edit <name>
set content
set display-name
config email-template
edit default
set from <string>
set subject <string>
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in HTML code. |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in text format. |
|
ibe-notify-wunread-rcpt
Use this sub-command to configure the variables and the default email template of the IBE “unread” notification to the recipient when a mail remains unread for a period of time.
Syntax
This sub-command is available from within the command customized-message.
edit ibe-notify-wunread-rcpt
config variable
edit <name>
set content
set display-name
config email-template
edit default
set from <string>
set subject <string>
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in HTML code. |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in text format. |
|
ibe-notify-wunread-sender
Use this sub-command to configure the variables and the default email template of the IBE “unread” notification to the sender when a mail remains unread for a period of time.
Syntax
This sub-command is available from within the command customized-message.
edit ibe-notify-wread-notif
config variable
edit <name>
set content
set display-name
config email-template
edit default
set from <string>
set subject <string>
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in HTML code. |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in text format. |
|
ibe-password-reset-page
Use this sub-command to configure the variables and the default content of the custom IBE password reset page.
Syntax
This sub-command is available from within the command customized-message.
edit ibe-password-reset-page
config variable
edit <name>
set content
set display-name
config message
edit default
set content <string>
set format {html | multiline | text}
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the webmail login. |
|
|
|
Select the format for the webmail login. |
text |
ibe-register-page
Use this sub-command to configure the variables and the default content of the custom IBE user registration page.
Syntax
This sub-command is available from within the command customized-message.
edit ibe-register-page
config variable
edit <name>
set content
set display-name
config message
edit default
set content <string>
set format {html | multiline | text}
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the webmail login. |
|
|
|
Select the format for the webmail login. |
text |
ibe-tfa-email-verify
Use this sub-command to configure the variables and the default email template for the secure token notification.
Syntax
This sub-command is available from within the command customized-message.
edit ibe-tfa-email-verify
config variable
edit <name>
set content
set display-name
config email-template
edit default
set from <string>
set html-body <string>
set subject <string>
set text-body <string>
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in HTML code. |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in text format. |
|
ibe-tfa-register-page
Use this sub-command to configure the variables and the default content of the custom IBE user two-factor authentication registration page.
Syntax
This sub-command is available from within the command customized-message.
edit ibe-tfa-register-page
config variable
edit <name>
set content
set display-name
config message
edit default
set content <string>
set format {html | multiline | text}
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the webmail login. |
|
|
|
Select the format for the webmail login. |
text |
ibe-tfa-sms-verify
Use this sub-command to configure the variables and the default content of the custom IBE user two-factor authentication SMS verification.
Syntax
This sub-command is available from within the command customized-message.
edit ibe-tfa-sms-verify
config variable
edit <name>
set content
set display-name
config message
edit default
set content <string>
set format {html | multiline | text}
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the webmail login. |
|
|
|
Select the format for the webmail login. |
text |
log-report
Use this sub-command to configure the variables and the default content of the FortiMail log report.
Syntax
This sub-command is available from within the command customized-message.
edit log-report
config variable
edit <name>
set content
set display-name
config message
edit default
set from <string>
set subject <string>
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the email Envelope From field. |
|
|
|
Enter the replacement message for the email From field. |
|
|
|
Enter the replacement email body in HTML format. |
|
|
|
Enter the replacement message for the email Subject header. |
|
|
|
Enter the replacement email body in text format. |
|
login-disclaimer
Use this sub-command to configure the variables and the default content of the FortiMail system login disclaimer.
Syntax
This sub-command is available from within the command customized-message.
edit login-disclaimer
config variable
edit <name>
set content
set display-name
config message
edit default
set content <string>
set format {html | multiline | text}
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the login disclaimer. |
|
|
|
Select the format for the login disclaimer. |
html |
reject-content-attachment
Use this sub-command to configure the variables and the default content of the attachment filtering message. This message is sent when an email is rejected for containing banned attachments.
Syntax
This sub-command is available from within the command customized-message.
edit reject-content-attachment
config variable
edit <name>
set content
set display-name
config message
edit default
set content <string>
set format {html | multiline | text}
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the attachment filtering message. |
|
|
|
Select the format for the attachment filtering message. |
html |
reject-content-message
Use this sub-command to configure the variables and the default content of the content filtering message. This message is sent when an email is rejected for containing sensitive content.
Syntax
This sub-command is available from within the command customized-message.
edit reject-content-message
config variable
edit <name>
set content
set display-name
config message
edit default
set content <string>
set format {html | multiline | text}
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the content filtering message. |
|
|
|
Select the format for the content filtering message. |
html |
reject-delivery
Use this sub-command to configure the variables and the default content of the message delivery failure message.
Syntax
This sub-command is available from within the command customized-message.
edit reject-delivery
config variable
edit <name>
set content
set display-name
config message
edit default
set content <string>
set format {html | multiline | text}
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the delivery failure message. |
|
|
|
Select the format for the delivery failure message. |
html |
reject-endpoint-reputation
Use this sub-command to configure the variables and the default content of the content filtering message. This message is sent when an email is rejected for carrier endpoint reputation check.
Syntax
This sub-command is available from within the command customized-message.
edit reject-endpoint-reputation
config variable
edit <name>
set content
set display-name
config message
edit default
set content <string>
set format {html | multiline | text}
end
|
Variable |
Description |
Default |
|
<name> |
Enter a variable name that you want to add or edit, such as |
|
|
content |
Enter the content for the variable. |
|
|
display-name |
Enter the display name for the variable. For example, the display name for |
|
|
content <string> |
Enter the replacement message for the content filtering message. |
|
|
format {html | multiline | text} |
Select the format for the content filtering message. |
html |
reject-spam
Use this sub-command to configure the variables and the default content of the spam message. This message is sent when an email is rejected for being detected as spam.
Syntax
This sub-command is available from within the command customized-message.
edit reject-spam
config variable
edit <name>
set content
set display-name
config message
edit default
set content <string>
set format {html | multiline | text}
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the spam message. |
|
|
|
Select the format for the spam message. |
html |
reject-virus-message
Use this sub-command to configure the variables and the default content of the virus message. This message is sent when an email is rejected for being infected with virus.
Syntax
This sub-command is available from within the command customized-message.
edit reject-virus-message
config variable
edit <name>
set content
set display-name
config message
edit default
set content <string>
set format {html | multiline | text}
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the virus message. |
|
|
|
Select the format for the virus message. |
html |
reject-virus-suspicious
Use this sub-command to configure the variables and the default content of the suspicious message. This message is sent when an email is rejected for containing suspicious components.
Syntax
This sub-command is available from within the command customized-message.
edit reject-virus-suspicious
config variable
edit <name>
set content
set display-name
config message
edit default
set content <string>
set format {html | multiline | text}
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the suspicious message. |
|
|
|
Select the format for the suspicious message. |
html |
replace-content-attachment
Use this sub-command to create the variables for and replace the default content of the attachment filtering message. This message is sent when the attachment of an email is blocked.
Syntax
This sub-command is available from within the command customized-message.
edit replace-content-attachment
config variable
edit <name>
set content
set display-name
config message
edit default
set content <string>
set format {html | multiline | text}
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the attachment filtering message. |
|
|
|
Select the format for the attachment filtering message. |
html |
replace-content-body
Use this sub-command to create the variables for and replace the default body of the content filtering message. This message is sent when an email is rejected for containing corporate sensitive data.
Syntax
This sub-command is available from within the command customized-message.
edit replace-content-body
config variable
edit <name>
set content
set display-name
config message
edit default
set content <string>
set format {html | multiline | text}
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the body of the content filtering message. |
|
|
|
Select the format for the body of the content filtering message. |
html |
replace-content-subject
Use this sub-command to create the variables for and replace the default subject of the content filtering message. This message is sent when an email is rejected for containing corporate sensitive data.
Syntax
This sub-command is available from within the command customized-message.
edit replace-content-subject
config variable
edit <name>
set content
set display-name
config message
edit default
set content <string>
set format {html | multiline | text}
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the subject of the content filtering message. |
|
|
|
Select the format for the subject of content filtering message. |
html |
replace-dlp-body
Use this sub-command to configure the variables and the default replacement message body for email data loss prevention.
Syntax
This sub-command is available from within the command customized-message.
edit replace-dlp-body
config variable
edit <name>
set content
set display-name
config message
edit default
set content <string>
set format {html | multiline | text}
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for infected email attachments. |
|
|
|
Select the format for the replacement message of infected email attachments. |
multiline |
replace-dlp-subject
Use this sub-command to configure the variables and the default replacement message subject for email data loss prevention.
Syntax
This sub-command is available from within the command customized-message.
edit replace-dlp-subject
config variable
edit <name>
set content
set display-name
config message
edit default
set content <string>
set format {html | multiline | text}
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for infected email attachments. |
|
|
|
Select the format for the replacement message of infected email attachments. |
multiline |
replace-virus-message
Use this sub-command to configure the variables and the default replacement message for infected email attachments. This message is sent when an email’s attachment is removed for being infected with a virus.
Syntax
This sub-command is available from within the command customized-message.
edit replace-virus-message
config variable
edit <name>
set content
set display-name
config message
edit default
set content <string>
set format {html | multiline | text}
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for infected email attachments. |
|
|
|
Select the format for the replacement message of infected email attachments. |
html |
replace-virus-suspicious
Use this sub-command to configure the variables and the default replacement message for suspicious email attachments. This message is sent when an email’s attachment is removed for containing suspicious components.
Syntax
This sub-command is available from within the command customized-message.
edit replace-virus-suspicious
config variable
edit <name>
set content
set display-name
config message
edit default
set content <string>
set format {html | multiline | text}
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for suspicious email attachments. |
|
|
|
Select the format for the replacement message of suspicious email attachments. |
html |
report-active-mailbox-summary
Use this sub-command to configure the variables and the default email template of the mailbox statistic report.
Syntax
This sub-command is available from within the command customized-message.
edit report-active-mailbox-summary
config variable
edit <name>
set content
set display-name
config email-template
edit default
set env-from <string>
ste from <string>
set html-body <string>
set subject <string>
set text-body <string>
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
|
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in HTML code. |
|
|
|
Enter the replacement message for the |
|
|
|
Enter the replacement message for the notification email body in text format. |
|
report-quarantine-summary
Use this sub-command to configure the variables and the default email template of quarantine summary.
Syntax
This sub-command is available from within the command customized-message.
edit report-quarantine-summary
config variable
edit <name>
set content
set display-name
config email-template
edit default
set from <string>
set subject <string>
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for the |
|
|
|
html-body <string> |
Enter the replacement message for the email body of the quarantine summary in HTML code. |
|
|
subject <string> |
Enter the replacement message for the |
|
|
text-body <string> |
Enter the replacement message for the email body of the quarantine summary in text format. |
|
uri-protection-allow-with-confirmation
Use this sub-command to configure the variables and the default replacement message for allowing suspicious URIs with user confirmation.
Syntax
This sub-command is available from within the command customized-message.
edit uri-protection-allow-with-confirmation
config variable
edit <name>
set content
set display-name
config message
edit default
set content <string>
set format {html | multiline | text}
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for suspicious email attachments. |
|
|
|
Select the format for the replacement message of suspicious email attachments. |
text |
uri-protection-block
Use this sub-command to configure the variables and the default replacement message for blocking suspicious URIs.
Syntax
This sub-command is available from within the command customized-message.
edit uri-protection-block
config variable
edit <name>
set content
set display-name
config message
edit default
set content <string>
set format {html | multiline | text}
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for suspicious email attachments. |
|
|
|
Select the format for the replacement message of suspicious email attachments. |
text |
uri-protection-remove
Use this sub-command to configure the variables and the default replacement message for removed URIs.
Syntax
This sub-command is available from within the command customized-message.
edit uri-protection-remove
config variable
edit <name>
set content
set display-name
config message
edit default
set content <string>
set format {html | multiline | text}
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for suspicious email attachments. |
|
|
|
Select the format for the replacement message of suspicious email attachments. |
text |
uri-protection-uri-evaluation
Use this sub-command to configure the variables and the default replacement message for click protection URI evaluation.
Syntax
This sub-command is available from within the command customized-message.
edit uri-protection-uri-evaluation
config variable
edit <name>
set content
set display-name
config message
edit default
set content <string>
set format {html | multiline | text}
end
|
Variable |
Description |
Default |
|
Enter a variable name that you want to add or edit, such as |
|
|
|
Enter the content for the variable. |
|
|
|
Enter the display name for the variable. For example, the display name for |
|
|
|
Enter the replacement message for suspicious email attachments. |
|
|
|
Select the format for the replacement message of suspicious email attachments. |
text |