Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

CLI Reference

customized-message

Use this command to configure replacement messages.

When the FortiMail unit detects a virus in an email attachment, it replaces the attachment with a message that provides information about the virus and source of the email.

The FortiMail unit may also use replacement messages when notifying a recipient that it has blocked an email as spam or due to content filtering, or when sending a quarantine report.

You can customize the secure message notifications that secure email recipients receive when IBE encrypted email are sent to them, and configure simple network management protocol (SNMP) settings.

Syntax

This command contains many sub-commands. Each sub-command, linked in the table below, is documented in subsequent sections.

config customized-message

edit <message_name>

next

end

Variable

Description

Default

<message_name>

Select the replacement message that you want to customize.

The message names include:

alert-email

as-sender-rate-notify

attachment-filtering-notify

calendar-event-notify

calendar-share-notify

content-disarm-reconstruct

custom-webmail-login

disclaimer-insertion

email-template-av-repack

email-template-notify-generic

ibe-login-page

ibe-notify-account-delete

ibe-notify-account-expiry

ibe-notify-account-expiry-alert

ibe-notify-account-lock

ibe-notify-account-reset

ibe-notify-account-reset-done

ibe-notify-config-change

ibe-notify-password-reset

ibe-notify-password-reset-done

ibe-notify-pull-message

ibe-notify-push-message

ibe-notify-registration

ibe-notify-user-register-done

ibe-notify-wread-notif

ibe-notify-wunread-rcpt

ibe-notify-wunread-sender

ibe-password-reset-page

ibe-register-page

ibe-tfa-email-verify

ibe-tfa-register-page

ibe-tfa-sms-verify

ibe-tfa-voice-twilio-xml

log-report

login-disclaimer

reject-content-attachment

reject-content-message

reject-delivery

reject-endpoint-reputation

reject-spam

reject-virus-message

reject-virus-suspicious

replace-content-attachment

replace-content-body

replace-content-subject

replace-virus-message

replace-virus-suspicious

report-active-mailbox-summary

report-quarantine-summary

uri-protection-allow-with-confirmation

uri-protection-block

uri-protection-remove

uri-protection-uri-evaluation

Related topics

config domain-setting

config policy recipient

alert-email

Use this sub-command to configure the variables and the default email template of the alert email.

Syntax

This sub-command is available from within the command customized-message.

edit alert-email

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%MEETING%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%MEETING%% can be weekly meeting.

 

from <string>

Enter the replacement message for the from field of the event notification email.

 

html-body <string>

Enter the replacement message for the email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the email body in text format.

 

as-sender-rate-notify

Use this sub-command to configure the variables and the default email template of the notifications for spam sender’s sending rate.

Syntax

This sub-command is available from within the command customized-message.

edit as-sender-rate-notify

config variable

edit <name>

set content

set display-name

config email-template

edit default

set env-from <string>

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

set to <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%MEETING%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%MEETING%% can be weekly meeting.

 

env-from <string>

Enter the replacement message for the email Envelope From field.

 

from <string>

Enter the replacement message for the email From field.

 

html-body <string>

Enter the replacement email body in HTML format.

 

subject <string>

Enter the replacement message for the email Subject header.

 

text-body <string>

Enter the replacement email body in text format.

 

to <string>

Enter the replacement message for the email To field.

 

attachment-filtering-notify

Use this sub-command to configure the variables and the default email template of the notification for attachment filtering.

Syntax

This sub-command is available from within the command customized-message.

edit attachment-filtering-notify

config variable

edit <name>

set content

set display-name

config email-template

edit default

set env-from

set env-to

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

set to <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%MEETING%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%MEETING%% can be weeklymeeting.

 

env-from <string> Enter the replacement message for the email Envelope From field.

 

env-to <string> Enter the replacement message for the email Envelope To field.

 

from <string> Enter the replacement message for the email From field.

 

html-body <string>

Enter the replacement email body in HTML format.

 

subject <string>

Enter the replacement message for the email Subject header.

 

text-body <string>

Enter the replacement email body in text format.

 

to <string> Enter the replacement message for the email To field.

 

calendar-event-notify

Use this sub-command to configure the variables and the default email template of the notification for calendar events in FortiMail webmail.

Syntax

This sub-command is available from within the command customized-message.

edit calendar-event-notify

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%MEETING%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%MEETING%% can be weekly meeting.

 

from <string>

Enter the replacement message for the from field of the event notification email.

 

html-body <string>

Enter the replacement message for the email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the email body in text format.

 

calendar-share-notify

Use this sub-command to configure the variables and the default email template of the notification for calendar sharing in FortiMail webmail.

Syntax

This sub-command is available from within the command customized-message.

edit calendar-share-notify

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%MEETING%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%MEETING%% can be weeklymeeting.

 

from <string>

Enter the replacement message for the from field of the notification.

 

html-body <string>

Enter the replacement message for the email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the email body in text format.

 

content-disarm-reconstruct

Use this sub-command to configure the variables and the default content of the notification message for Office and/or PDF attachment content disarm and reconstruction (CDR).

Syntax

This sub-command is available from within the command customized-message.

edit content-disarm-reconstruct

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%FILE%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%FILE%% can be Login.

 

content <string>

Enter the replacement message for the webmail login.

 

format {html | multiline | text}

Select the format for the webmail login.

html

custom-webmail-login

Use this sub-command to configure the variables and the default content of the webmail login.

Syntax

This sub-command is available from within the command customized-message.

edit custom-webmail-login

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%FILE%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%FILE%% can be Login.

 

content <string>

Enter the replacement message for the webmail login.

 

format {html | multiline | text}

Select the format for the webmail login.

html

disclaimer-insertion

Use this sub-command to configure the variables and the default content of the disclaimer insertion message.

Syntax

This sub-command is available from within the command customized-message.

edit disclaimer-insertion

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%FILE%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%FILE%% can be Login.

 

content <string>

Enter the replacement message for the webmail login.

 

format {html | multiline | text}

Select the format for the webmail login.

html

email-template-av-repack

Use this sub-command to configure the variables and the default content of the email template for antivirus action.

Syntax

This sub-command is available from within the command customized-message.

edit email-template-av-repack

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%FILE%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%FILE%% can be Template.

 

from <string>

Enter the replacement message for the email From field.

 

html-body <string>

Enter the replacement email body in HTML format.

 

subject <string>

Enter the replacement message for the email Subject field.

 

text-body <string>

Enter the replacement email body in text format.

 

email-template-notify-generic

Use this sub-command to configure the variables and the default content of the email template for generic notifications.

Syntax

This sub-command is available from within the command customized-message.

edit email-template-notify-generic

config variable

edit <name>

set content

set display-name

config email-template

edit default

set env-from <string>

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

set to <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%FILE%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%FILE%% can be Template.

 

env-from <string>

Enter the replacement message for the email Envelope From field.

 

from <string>

Enter the replacement message for the email From field.

 

html-body <string>

Enter the replacement email body in HTML format.

 

subject <string>

Enter the replacement message for the email Subject header.

 

text-body <string>

Enter the replacement email body in text format.

 

to <string>

Enter the replacement message for the email To field.

 

ibe-login-page

Use this sub-command to configure the variables and the default replacement message for the custom IBE login page.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-login-page

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%WARNING%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%WARNING%% can be Notice.

 

content <string>

Enter the replacement message for suspicious email attachments.

 

format {html | multiline | text}

Select the format for the replacement message of suspicious email attachments.

text

ibe-notify-account-delete

Use this sub-command to configure the variables and the default email template of the IBE account delete notification.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-notify-account-delete

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%SENDER%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%SENDER%% can be From.

 

from <string>

Enter the replacement message for the From field of the notification.

 

html-body <string>

Enter the replacement message for the notification email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the notification email body in text format.

 

ibe-notify-account-expiry

Use this sub-command to configure the variables and the default email template of the IBE account expiry notification.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-notify-account-expiry

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%SENDER%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%SENDER%% can be From.

 

from <string>

Enter the replacement message for the From field of the notification.

 

html-body <string>

Enter the replacement message for the notification email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the notification email body in text format.

 

ibe-notify-account-expiry-alert

Use this sub-command to configure the variables and the default email template of the IBE account expiry alert notification.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-notify-account-expiry-alert

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%SENDER%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%SENDER%% can be From.

 

from <string>

Enter the replacement message for the From field of the notification.

 

html-body <string>

Enter the replacement message for the notification email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the notification email body in text format.

 

ibe-notify-account-lock

Use this sub-command to configure the variables and the default email template of the IBE account lock notification.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-notify-account-lock

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%SENDER%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%SENDER%% can be From.

 

from <string>

Enter the replacement message for the From field of the notification.

 

html-body <string>

Enter the replacement message for the notification email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the notification email body in text format.

 

ibe-notify-account-reset

Use this sub-command to configure the variables and the default email template of the IBE account reset notification.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-notify-account-reset

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%SENDER%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%SENDER%% can be From.

 

from <string>

Enter the replacement message for the From field of the notification.

 

html-body <string>

Enter the replacement message for the notification email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the notification email body in text format.

 

ibe-notify-account-reset-done

Use this sub-command to configure the variables and the default email template of the IBE account reset completion notification.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-notify-account-reset-done

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set global-bayesian {enable | disable}

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%SENDER%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%SENDER%% can be From.

 

from <string>

Enter the replacement message for the From field of the notification.

 

html-body <string>

Enter the replacement message for the notification email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the notification email body in text format.

 

ibe-notify-config-change

Use this sub-command to configure the variables and the default email template of the IBE account security settings changed notification.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-notify-config-change

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%SENDER%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%SENDER%% can be From.

 

from <string>

Enter the replacement message for the From field of the notification.

 

html-body <string>

Enter the replacement message for the notification email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the notification email body in text format.

 

ibe-notify-password-reset

Use this sub-command to configure the variables and the default email template of the IBE password reset notification.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-notify-password-reset

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%SENDER%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%SENDER%% can be From.

 

from <string>

Enter the replacement message for the From field of the notification.

 

html-body <string>

Enter the replacement message for the notification email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the notification email body in text format.

 

ibe-notify-password-reset-done

Use this sub-command to configure the variables and the default email template of the IBE password reset completion notification.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-notify-password-reset-done

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%SENDER%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%SENDER%% can be From.

 

from <string>

Enter the replacement message for the From field of the notification.

 

html-body <string>

Enter the replacement message for the notification email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the notification email body in text format.

 

ibe-notify-pull-message

Use this sub-command to configure the variables and the default email template of the secure message notification containing a link which the Webmail users can click to read the message.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-notify-pull-message

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%SENDER%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%SENDER%% can be From.

 

from <string>

Enter the replacement message for the From field of the notification.

 

html-body <string>

Enter the replacement message for the notification email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the notification email body in text format.

 

ibe-notify-push-message

Use this sub-command to configure the variables and the default email template of the secure message notification with an attachment containing the secure message.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-notify-push-message

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%SENDER%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%SENDER%% can be From.

 

from <string>

Enter the replacement message for the From field of the notification.

 

html-body <string>

Enter the replacement message for the notification email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the notification email body in text format.

 

ibe-notify-registration

Use this sub-command to configure the variables and the default email template for registration notification.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-notify-registration

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%SENDER%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%SENDER%% can be From.

 

from <string>

Enter the replacement message for the From field of the notification.

 

html-body <string>

Enter the replacement message for the notification email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the notification email body in text format.

 

ibe-notify-user-register-done

Use this sub-command to configure the variables and the default email template of the IBE user registration notification.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-notify-user-register-done

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%SENDER%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%SENDER%% can be From.

 

from <string>

Enter the replacement message for the From field of the notification.

 

html-body <string>

Enter the replacement message for the notification email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the notification email body in text format.

 

ibe-notify-wread-notif

Use this sub-command to configure the variables and the default email template of the IBE “read” notification which is the first time the message is read.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-notify-wread-notif

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%SENDER%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%SENDER%% can be From.

 

from <string>

Enter the replacement message for the From field of the notification.

 

html-body <string>

Enter the replacement message for the notification email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the notification email body in text format.

 

ibe-notify-wunread-rcpt

Use this sub-command to configure the variables and the default email template of the IBE “unread” notification to the recipient when a mail remains unread for a period of time.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-notify-wunread-rcpt

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%SENDER%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%SENDER%% can be From.

 

from <string>

Enter the replacement message for the From field of the notification.

 

html-body <string>

Enter the replacement message for the notification email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the notification email body in text format.

 

ibe-notify-wunread-sender

Use this sub-command to configure the variables and the default email template of the IBE “unread” notification to the sender when a mail remains unread for a period of time.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-notify-wread-notif

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%SENDER%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%SENDER%% can be From.

 

from <string>

Enter the replacement message for the From field of the notification.

 

html-body <string>

Enter the replacement message for the notification email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the notification email body in text format.

 

ibe-password-reset-page

Use this sub-command to configure the variables and the default content of the custom IBE password reset page.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-password-reset-page

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%FILE%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%FILE%% can be Login.

 

content <string>

Enter the replacement message for the webmail login.

 

format {html | multiline | text}

Select the format for the webmail login.

text

ibe-register-page

Use this sub-command to configure the variables and the default content of the custom IBE user registration page.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-register-page

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%FILE%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%FILE%% can be Login.

 

content <string>

Enter the replacement message for the webmail login.

 

format {html | multiline | text}

Select the format for the webmail login.

text

ibe-tfa-email-verify

Use this sub-command to configure the variables and the default email template for the secure token notification.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-tfa-email-verify

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%SENDER%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%SENDER%% can be From.

 

from <string>

Enter the replacement message for the From field of the notification.

 

html-body <string>

Enter the replacement message for the notification email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the notification email body in text format.

 

ibe-tfa-register-page

Use this sub-command to configure the variables and the default content of the custom IBE user two-factor authentication registration page.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-tfa-register-page

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%FILE%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%FILE%% can be Login.

 

content <string>

Enter the replacement message for the webmail login.

 

format {html | multiline | text}

Select the format for the webmail login.

text

ibe-tfa-sms-verify

Use this sub-command to configure the variables and the default content of the custom IBE user two-factor authentication SMS verification.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-tfa-sms-verify

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%FILE%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%FILE%% can be Login.

 

content <string>

Enter the replacement message for the webmail login.

 

format {html | multiline | text}

Select the format for the webmail login.

text

ibe-tfa-voice-twilio-xml

Use this sub-command to configure the variables and the default content of the custom voice message template for secure token notification.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-tfa-voice-twilio-xml

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%FILE%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%FILE%% can be Login.

 

content <string>

Enter the replacement message for the webmail login.

 

format {html | multiline | text}

Select the format for the webmail login.

text

log-report

Use this sub-command to configure the variables and the default content of the FortiMail log report.

Syntax

This sub-command is available from within the command customized-message.

edit log-report

config variable

edit <name>

set content

set display-name

config message

edit default

set env-from <string>

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%WARNING%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%WARNING%% can be Disclaimer.

 

env-from <string>

Enter the replacement message for the email Envelope From field.

 

from <string>

Enter the replacement message for the email From field.

 

html-body <string>

Enter the replacement email body in HTML format.

 

subject <string>

Enter the replacement message for the email Subject header.

 

text-body <string>

Enter the replacement email body in text format.

 

login-disclaimer

Use this sub-command to configure the variables and the default content of the FortiMail system login disclaimer.

Syntax

This sub-command is available from within the command customized-message.

edit login-disclaimer

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%WARNING%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%WARNING%% can be Disclaimer.

 

content <string>

Enter the replacement message for the login disclaimer.

 

format {html | multiline | text}

Select the format for the login disclaimer.

html

reject-content-attachment

Use this sub-command to configure the variables and the default content of the attachment filtering message. This message is sent when an email is rejected for containing banned attachments.

Syntax

This sub-command is available from within the command customized-message.

edit reject-content-attachment

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%REJECTION%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%REJECTION%% can be Notice.

 

content <string>

Enter the replacement message for the attachment filtering message.

 

format {html | multiline | text}

Select the format for the attachment filtering message.

html

reject-content-message

Use this sub-command to configure the variables and the default content of the content filtering message. This message is sent when an email is rejected for containing sensitive content.

Syntax

This sub-command is available from within the command customized-message.

edit reject-content-message

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%REJECTION%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%REJECTION%% can be Notice.

 

content <string>

Enter the replacement message for the content filtering message.

 

format {html | multiline | text}

Select the format for the content filtering message.

html

reject-delivery

Use this sub-command to configure the variables and the default content of the message delivery failure message.

Syntax

This sub-command is available from within the command customized-message.

edit reject-delivery

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%REJECTION%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%REJECTION%% can be Notice.

 

content <string>

Enter the replacement message for the delivery failure message.

 

format {html | multiline | text}

Select the format for the delivery failure message.

html

reject-endpoint-reputation

Use this sub-command to configure the variables and the default content of the content filtering message. This message is sent when an email is rejected for carrier endpoint reputation check.

Syntax

This sub-command is available from within the command customized-message.

edit reject-endpoint-reputation

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%REJECTION%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%REJECTION%% can be Endpoint.

 

content <string>

Enter the replacement message for the content filtering message.

 

format {html | multiline | text}

Select the format for the content filtering message.

html

reject-spam

Use this sub-command to configure the variables and the default content of the spam message. This message is sent when an email is rejected for being detected as spam.

Syntax

This sub-command is available from within the command customized-message.

edit reject-spam

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%REJECTION%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%REJECTION%% can be Notice.

 

content <string>

Enter the replacement message for the spam message.

 

format {html | multiline | text}

Select the format for the spam message.

html

reject-virus-message

Use this sub-command to configure the variables and the default content of the virus message. This message is sent when an email is rejected for being infected with virus.

Syntax

This sub-command is available from within the command customized-message.

edit reject-virus-message

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%REJECTION%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%REJECTION%% can be Notice.

 

content <string>

Enter the replacement message for the virus message.

 

format {html | multiline | text}

Select the format for the virus message.

html

reject-virus-suspicious

Use this sub-command to configure the variables and the default content of the suspicious message. This message is sent when an email is rejected for containing suspicious components.

Syntax

This sub-command is available from within the command customized-message.

edit reject-virus-suspicious

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%REJECTION%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%REJECTION%% can be Notice.

 

content <string>

Enter the replacement message for the suspicious message.

 

format {html | multiline | text}

Select the format for the suspicious message.

html

replace-content-attachment

Use this sub-command to create the variables for and replace the default content of the attachment filtering message. This message is sent when the attachment of an email is blocked.

Syntax

This sub-command is available from within the command customized-message.

edit replace-content-attachment

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%BLOCK%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%BLOCK%% can be Notice.

 

content <string>

Enter the replacement message for the attachment filtering message.

 

format {html | multiline | text}

Select the format for the attachment filtering message.

html

replace-content-body

Use this sub-command to create the variables for and replace the default body of the content filtering message. This message is sent when an email is rejected for containing corporate sensitive data.

Syntax

This sub-command is available from within the command customized-message.

edit replace-content-body

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%REJECT%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%REJECT%% can be Notice.

 

content <string>

Enter the replacement message for the body of the content filtering message.

 

format {html | multiline | text}

Select the format for the body of the content filtering message.

html

replace-content-subject

Use this sub-command to create the variables for and replace the default subject of the content filtering message. This message is sent when an email is rejected for containing corporate sensitive data.

Syntax

This sub-command is available from within the command customized-message.

edit replace-content-subject

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%REJECT%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%REJECT%% can be Notice.

 

content <string>

Enter the replacement message for the subject of the content filtering message.

 

format {html | multiline | text}

Select the format for the subject of content filtering message.

html

replace-virus-message

Use this sub-command to configure the variables and the default replacement message for infected email attachments. This message is sent when an email’s attachment is removed for being infected with a virus.

Syntax

This sub-command is available from within the command customized-message.

edit replace-virus-message

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%WARNING%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%WARNING%% can be Notice.

 

content <string>

Enter the replacement message for infected email attachments.

 

format {html | multiline | text}

Select the format for the replacement message of infected email attachments.

html

replace-virus-suspicious

Use this sub-command to configure the variables and the default replacement message for suspicious email attachments. This message is sent when an email’s attachment is removed for containing suspicious components.

Syntax

This sub-command is available from within the command customized-message.

edit replace-virus-suspicious

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%WARNING%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%WARNING%% can be Notice.

 

content <string>

Enter the replacement message for suspicious email attachments.

 

format {html | multiline | text}

Select the format for the replacement message of suspicious email attachments.

html

report-active-mailbox-summary

Use this sub-command to configure the variables and the default email template of the mailbox statistic report.

Syntax

This sub-command is available from within the command customized-message.

edit report-active-mailbox-summary

config variable

edit <name>

set content

set display-name

config email-template

edit default

set env-from <string>

ste from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%SENDER%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%SENDER%% can be From.

 

 

 

 

from <string>

Enter the replacement message for the From field of the notification.

 

html-body <string>

Enter the replacement message for the notification email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the notification email body in text format.

 

report-quarantine-summary

Use this sub-command to configure the variables and the default email template of quarantine summary.

Syntax

This sub-command is available from within the command customized-message.

edit report-quarantine-summary

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%SENDER%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%SENDER%% can be From.

 

from <string>

Enter the replacement message for the From field of the quarantine summary.

 

html-body <string>

Enter the replacement message for the email body of the quarantine summary in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the quarantine summary.

 

text-body <string>

Enter the replacement message for the email body of the quarantine summary in text format.

 

uri-protection-allow-with-confirmation

Use this sub-command to configure the variables and the default replacement message for allowing suspicious URIs with user confirmation.

Syntax

This sub-command is available from within the command customized-message.

edit uri-protection-allow-with-confirmation

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%WARNING%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%WARNING%% can be Notice.

 

content <string>

Enter the replacement message for suspicious email attachments.

 

format {html | multiline | text}

Select the format for the replacement message of suspicious email attachments.

text

uri-protection-block

Use this sub-command to configure the variables and the default replacement message for blocking suspicious URIs.

Syntax

This sub-command is available from within the command customized-message.

edit uri-protection-block

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%WARNING%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%WARNING%% can be Notice.

 

content <string>

Enter the replacement message for suspicious email attachments.

 

format {html | multiline | text}

Select the format for the replacement message of suspicious email attachments.

text

uri-protection-remove

Use this sub-command to configure the variables and the default replacement message for removed URIs.

Syntax

This sub-command is available from within the command customized-message.

edit uri-protection-remove

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%WARNING%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%WARNING%% can be Notice.

 

content <string>

Enter the replacement message for suspicious email attachments.

 

format {html | multiline | text}

Select the format for the replacement message of suspicious email attachments.

text

uri-protection-uri-evaluation

Use this sub-command to configure the variables and the default replacement message for click protection URI evaluation.

Syntax

This sub-command is available from within the command customized-message.

edit uri-protection-uri-evaluation

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%WARNING%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%WARNING%% can be Notice.

 

content <string>

Enter the replacement message for suspicious email attachments.

 

format {html | multiline | text}

Select the format for the replacement message of suspicious email attachments.

text

customized-message

Use this command to configure replacement messages.

When the FortiMail unit detects a virus in an email attachment, it replaces the attachment with a message that provides information about the virus and source of the email.

The FortiMail unit may also use replacement messages when notifying a recipient that it has blocked an email as spam or due to content filtering, or when sending a quarantine report.

You can customize the secure message notifications that secure email recipients receive when IBE encrypted email are sent to them, and configure simple network management protocol (SNMP) settings.

Syntax

This command contains many sub-commands. Each sub-command, linked in the table below, is documented in subsequent sections.

config customized-message

edit <message_name>

next

end

Variable

Description

Default

<message_name>

Select the replacement message that you want to customize.

The message names include:

alert-email

as-sender-rate-notify

attachment-filtering-notify

calendar-event-notify

calendar-share-notify

content-disarm-reconstruct

custom-webmail-login

disclaimer-insertion

email-template-av-repack

email-template-notify-generic

ibe-login-page

ibe-notify-account-delete

ibe-notify-account-expiry

ibe-notify-account-expiry-alert

ibe-notify-account-lock

ibe-notify-account-reset

ibe-notify-account-reset-done

ibe-notify-config-change

ibe-notify-password-reset

ibe-notify-password-reset-done

ibe-notify-pull-message

ibe-notify-push-message

ibe-notify-registration

ibe-notify-user-register-done

ibe-notify-wread-notif

ibe-notify-wunread-rcpt

ibe-notify-wunread-sender

ibe-password-reset-page

ibe-register-page

ibe-tfa-email-verify

ibe-tfa-register-page

ibe-tfa-sms-verify

ibe-tfa-voice-twilio-xml

log-report

login-disclaimer

reject-content-attachment

reject-content-message

reject-delivery

reject-endpoint-reputation

reject-spam

reject-virus-message

reject-virus-suspicious

replace-content-attachment

replace-content-body

replace-content-subject

replace-virus-message

replace-virus-suspicious

report-active-mailbox-summary

report-quarantine-summary

uri-protection-allow-with-confirmation

uri-protection-block

uri-protection-remove

uri-protection-uri-evaluation

Related topics

config domain-setting

config policy recipient

alert-email

Use this sub-command to configure the variables and the default email template of the alert email.

Syntax

This sub-command is available from within the command customized-message.

edit alert-email

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%MEETING%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%MEETING%% can be weekly meeting.

 

from <string>

Enter the replacement message for the from field of the event notification email.

 

html-body <string>

Enter the replacement message for the email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the email body in text format.

 

as-sender-rate-notify

Use this sub-command to configure the variables and the default email template of the notifications for spam sender’s sending rate.

Syntax

This sub-command is available from within the command customized-message.

edit as-sender-rate-notify

config variable

edit <name>

set content

set display-name

config email-template

edit default

set env-from <string>

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

set to <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%MEETING%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%MEETING%% can be weekly meeting.

 

env-from <string>

Enter the replacement message for the email Envelope From field.

 

from <string>

Enter the replacement message for the email From field.

 

html-body <string>

Enter the replacement email body in HTML format.

 

subject <string>

Enter the replacement message for the email Subject header.

 

text-body <string>

Enter the replacement email body in text format.

 

to <string>

Enter the replacement message for the email To field.

 

attachment-filtering-notify

Use this sub-command to configure the variables and the default email template of the notification for attachment filtering.

Syntax

This sub-command is available from within the command customized-message.

edit attachment-filtering-notify

config variable

edit <name>

set content

set display-name

config email-template

edit default

set env-from

set env-to

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

set to <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%MEETING%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%MEETING%% can be weeklymeeting.

 

env-from <string> Enter the replacement message for the email Envelope From field.

 

env-to <string> Enter the replacement message for the email Envelope To field.

 

from <string> Enter the replacement message for the email From field.

 

html-body <string>

Enter the replacement email body in HTML format.

 

subject <string>

Enter the replacement message for the email Subject header.

 

text-body <string>

Enter the replacement email body in text format.

 

to <string> Enter the replacement message for the email To field.

 

calendar-event-notify

Use this sub-command to configure the variables and the default email template of the notification for calendar events in FortiMail webmail.

Syntax

This sub-command is available from within the command customized-message.

edit calendar-event-notify

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%MEETING%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%MEETING%% can be weekly meeting.

 

from <string>

Enter the replacement message for the from field of the event notification email.

 

html-body <string>

Enter the replacement message for the email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the email body in text format.

 

calendar-share-notify

Use this sub-command to configure the variables and the default email template of the notification for calendar sharing in FortiMail webmail.

Syntax

This sub-command is available from within the command customized-message.

edit calendar-share-notify

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%MEETING%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%MEETING%% can be weeklymeeting.

 

from <string>

Enter the replacement message for the from field of the notification.

 

html-body <string>

Enter the replacement message for the email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the email body in text format.

 

content-disarm-reconstruct

Use this sub-command to configure the variables and the default content of the notification message for Office and/or PDF attachment content disarm and reconstruction (CDR).

Syntax

This sub-command is available from within the command customized-message.

edit content-disarm-reconstruct

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%FILE%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%FILE%% can be Login.

 

content <string>

Enter the replacement message for the webmail login.

 

format {html | multiline | text}

Select the format for the webmail login.

html

custom-webmail-login

Use this sub-command to configure the variables and the default content of the webmail login.

Syntax

This sub-command is available from within the command customized-message.

edit custom-webmail-login

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%FILE%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%FILE%% can be Login.

 

content <string>

Enter the replacement message for the webmail login.

 

format {html | multiline | text}

Select the format for the webmail login.

html

disclaimer-insertion

Use this sub-command to configure the variables and the default content of the disclaimer insertion message.

Syntax

This sub-command is available from within the command customized-message.

edit disclaimer-insertion

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%FILE%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%FILE%% can be Login.

 

content <string>

Enter the replacement message for the webmail login.

 

format {html | multiline | text}

Select the format for the webmail login.

html

email-template-av-repack

Use this sub-command to configure the variables and the default content of the email template for antivirus action.

Syntax

This sub-command is available from within the command customized-message.

edit email-template-av-repack

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%FILE%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%FILE%% can be Template.

 

from <string>

Enter the replacement message for the email From field.

 

html-body <string>

Enter the replacement email body in HTML format.

 

subject <string>

Enter the replacement message for the email Subject field.

 

text-body <string>

Enter the replacement email body in text format.

 

email-template-notify-generic

Use this sub-command to configure the variables and the default content of the email template for generic notifications.

Syntax

This sub-command is available from within the command customized-message.

edit email-template-notify-generic

config variable

edit <name>

set content

set display-name

config email-template

edit default

set env-from <string>

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

set to <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%FILE%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%FILE%% can be Template.

 

env-from <string>

Enter the replacement message for the email Envelope From field.

 

from <string>

Enter the replacement message for the email From field.

 

html-body <string>

Enter the replacement email body in HTML format.

 

subject <string>

Enter the replacement message for the email Subject header.

 

text-body <string>

Enter the replacement email body in text format.

 

to <string>

Enter the replacement message for the email To field.

 

ibe-login-page

Use this sub-command to configure the variables and the default replacement message for the custom IBE login page.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-login-page

config variable

edit <name>

set content

set display-name

config message

edit default

set content <string>

set format {html | multiline | text}

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%WARNING%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%WARNING%% can be Notice.

 

content <string>

Enter the replacement message for suspicious email attachments.

 

format {html | multiline | text}

Select the format for the replacement message of suspicious email attachments.

text

ibe-notify-account-delete

Use this sub-command to configure the variables and the default email template of the IBE account delete notification.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-notify-account-delete

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%SENDER%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%SENDER%% can be From.

 

from <string>

Enter the replacement message for the From field of the notification.

 

html-body <string>

Enter the replacement message for the notification email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the notification email body in text format.

 

ibe-notify-account-expiry

Use this sub-command to configure the variables and the default email template of the IBE account expiry notification.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-notify-account-expiry

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%SENDER%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%SENDER%% can be From.

 

from <string>

Enter the replacement message for the From field of the notification.

 

html-body <string>

Enter the replacement message for the notification email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the notification email body in text format.

 

ibe-notify-account-expiry-alert

Use this sub-command to configure the variables and the default email template of the IBE account expiry alert notification.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-notify-account-expiry-alert

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%SENDER%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%SENDER%% can be From.

 

from <string>

Enter the replacement message for the From field of the notification.

 

html-body <string>

Enter the replacement message for the notification email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the notification email body in text format.

 

ibe-notify-account-lock

Use this sub-command to configure the variables and the default email template of the IBE account lock notification.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-notify-account-lock

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%SENDER%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%SENDER%% can be From.

 

from <string>

Enter the replacement message for the From field of the notification.

 

html-body <string>

Enter the replacement message for the notification email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the notification email body in text format.

 

ibe-notify-account-reset

Use this sub-command to configure the variables and the default email template of the IBE account reset notification.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-notify-account-reset

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%SENDER%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%SENDER%% can be From.

 

from <string>

Enter the replacement message for the From field of the notification.

 

html-body <string>

Enter the replacement message for the notification email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the notification email body in text format.

 

ibe-notify-account-reset-done

Use this sub-command to configure the variables and the default email template of the IBE account reset completion notification.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-notify-account-reset-done

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set global-bayesian {enable | disable}

set subject <string>

set text-body <string>

end

Variable

Description

Default

<name>

Enter a variable name that you want to add or edit, such as %%SENDER%%.

 

content

Enter the content for the variable.

 

display-name

Enter the display name for the variable. For example, the display name for %%SENDER%% can be From.

 

from <string>

Enter the replacement message for the From field of the notification.

 

html-body <string>

Enter the replacement message for the notification email body in HTML code.

 

subject <string>

Enter the replacement message for the subject field of the notification.

 

text-body <string>

Enter the replacement message for the notification email body in text format.

 

ibe-notify-config-change

Use this sub-command to configure the variables and the default email template of the IBE account security settings changed notification.

Syntax

This sub-command is available from within the command customized-message.

edit ibe-notify-config-change

config variable

edit <name>

set content

set display-name

config email-template

edit default

set from <string>

set html-body <string>

set subject <string>

set text-body <string>

end

Variable