Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

CLI Reference

profile ip-pool

Use this command to define a range of IP addresses. IP pools can be used in multiple ways:

  • To define destination IP addresses of multiple protected SMTP servers if you want to load balance incoming email between them.
  • To define source IP addresses used by the FortiMail unit if you want outgoing email to originate from a range of IP addresses.

Each email that the FortiMail unit sends will use the next IP address in the range. When the last IP address in the range is used, the next email will use the first IP address.

For more information, see the FortiMail Administration Guide.

Syntax

config profile ip-pool

edit <profile_name>

set iprange {enable | disable}

end

Variable

Description

Default

<profile_name>

Enter the name of the IP pool profile.

 

iprange {enable | disable}

Enter the first and last IP address in each contiguous range included in the profile.

 

profile ip-pool

Use this command to define a range of IP addresses. IP pools can be used in multiple ways:

  • To define destination IP addresses of multiple protected SMTP servers if you want to load balance incoming email between them.
  • To define source IP addresses used by the FortiMail unit if you want outgoing email to originate from a range of IP addresses.

Each email that the FortiMail unit sends will use the next IP address in the range. When the last IP address in the range is used, the next email will use the first IP address.

For more information, see the FortiMail Administration Guide.

Syntax

config profile ip-pool

edit <profile_name>

set iprange {enable | disable}

end

Variable

Description

Default

<profile_name>

Enter the name of the IP pool profile.

 

iprange {enable | disable}

Enter the first and last IP address in each contiguous range included in the profile.