ms365 policy

Use this command to configure Microsoft 365 scan policies. You must have domain administrator privileges to access Microsoft 365.

Syntax

config ms365 policy

edit <name>

set profile-antispam <name>

set profile-antivirus <name>

set profile-content <name>

set profile-dlp <name>

set recipient-domain <string>

set recipient-name <string>

set sender-domain <string>

set sender-name <string>

set sender-type {external | internal | wildcard}

set source-ip-address <ipv4mask>

set source-type {geoip-group | ip-address | ip-group}

set status {enable | disable}

end

Variable	Description	Default
profile-antispam <name>	Assign an antispam profile to the real-time scan policy.
profile-antivirus <name>	Assign an antivirus profile to the real-time scan policy.
profile-content <name>	Assign an content profile to the real-time scan policy.
profile-dlp <name>	Assign an DLP profile to the real-time scan policy.
recipient-domain <string>	Domain part of recipient email address.
recipient-name <string>	Local part of recipient email address.
sender-domain <string>	Domain part of sender email address.
sender-name <string>	Local part of sender email address.
sender-type {external | internal | wildcard}	Define the sender as either external, internal, or wildcard pattern.	wildcard
source-ip-address <ipv4mask>	Client IP address and netmask.	0.0.0.0/0
source-type {geoip-group | ip-address | ip-group}	Define the source as either GeoIP group, IP address and netmask, or IP group.	ip-address
status {enable | disable}	Enable or disable the policy.	disable