Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

CLI Reference

raid

Use this command to find and add a hard disk to the array unit after you insert a second hard disk into the drive bay.

This command is only available for some FortiMail platforms which support RAID.

Syntax

execute raid add-disk

Example

You could notify the RAID controller to add the hard disk to the array unit after inserting a new hard disk.

execute raid

The CLI displays the following:

This operation will scan for new hard drives and add them into the RAID array

Do you want to continue? (y/n)

After you enter y (yes), if all hard disks have already been added to an array, the CLI displays the following:

existing raid disk at 12 is 120034123776

existing raid disk at 13 is 120034123776

no NEW disks in the system

Related topics

system status

raid

Use this command to find and add a hard disk to the array unit after you insert a second hard disk into the drive bay.

This command is only available for some FortiMail platforms which support RAID.

Syntax

execute raid add-disk

Example

You could notify the RAID controller to add the hard disk to the array unit after inserting a new hard disk.

execute raid

The CLI displays the following:

This operation will scan for new hard drives and add them into the RAID array

Do you want to continue? (y/n)

After you enter y (yes), if all hard disks have already been added to an array, the CLI displays the following:

existing raid disk at 12 is 120034123776

existing raid disk at 13 is 120034123776

no NEW disks in the system

Related topics

system status