Changing FortiAP settings
Use this procedure to change the settings of a FortiAP device.
When you configure a FortiAP device, you can apply or change the following settings:
- Tags
- Sites
- Platform Profiles (Use the default profile or a custom profile. See the FortiAP Platform Profile procedure) and Overrides (See the Overriding FortiAP Settings procedure.)
- Admin (Telnet, HTTP, HTTPS, SSH, SNMP) and Admin Password
- Firmware (See the Upgrading a FortiAP device procedure.)
- Undeploy (See the Undeploying a FortiAP device procedure.)
Procedure steps
- In the menu bar, click Access Points.
- In the navigation pane, click Edit View.
- In the table, locate the row for the FortiAP device to configure and click on the AP Actions tab.
- Edit settings as required.
- To save the changes, click Apply.