GPON support for FortiGates with SFP/SFP+ ports
This information is also available in the FortiOS 8.0 Administration Guide:
Support for Gigabit Passive Optical Network (GPON) transceivers has been added to FortiGates with SFP/SFP+ ports, enabling the firewall to operate directly as an ONU (Optical Network Unit) and allowing deployment in fiber-based access networks. This allows customers transitioning from legacy DSL infrastructure to adopt widely used GPON technology, improving interoperability and easing migration.
The following diagnose commands are added to the CLI:
|
Command |
Description |
|---|---|
|
diagnose gpon config loid [interface] [loid] [password] |
Configure Logical Identifier (LOID) username and password. |
|
diagnose gpon sysinfo [interface] |
Show transceiver system information. |
|
diagnose gpon state [interface] |
Show SFP GPON connection state. |
|
diagnose gpon traffic-stats [interface] |
Show SFP GPON traffic statistics. |
|
diagnose gpon reboot [interface] |
Reboot transceiver. |
To detect a GPON transceiver:
# get system interface transceiver sfp1 Interface sfp1 - SFP/SFP+/SFP28, 1000BASE-LX Diagnostics : temperature, voltage, Tx bias, Rx power (avg), Tx power Vendor Name : FORTINET Part No. : WST-SFP-GPAU2MIF Serial No. : TK5ANK0006 Measurement Unit Value High Alarm High Warning Low Warning Low Alarm ------------ ------------ ------------ ------------ ------------ ------------ ------------ Temperature (Celsius) 45.8 88.0 85.0 -40.0 -45.0 Voltage (Volts) 3.34 3.60 3.47 3.00 2.90 Tx Bias (mA) 14.49 60.00 55.00 0.00 0.00 Rx Power Avg (dBm) -9.2 -7.0 -8.0 -28.5 -29.6 Tx Power (dBm) 1.3 6.5 5.5 -0.5 -1.0 ++ : high alarm, + : high warning, - : low warning, -- : low alarm, ? : suspect.
To check the GPON system information:
# diagnose gpon sysinfo sfp1 Mac Address: 80:A5:79:50:11:1D Model Name: WST-SFP-GPAU2MIF Vendor: FORTINET Hardware Version: V1.0 Software Version: V1.2.4 Gpon SN: TK5ANK0006
To check the GPON state:
# diagnose gpon state sfp1
State codes: O1 - Initial, O2 - Standby, O3 - Serial-Number, O4 - Ranging
O5 - Operation, O6 - POPUP, O7 - Emergency-Stop
los = 0
state = O5
fec = 1
To check GPON traffic statistics:
# diagnose gpon traffic-stats sfp1 dsDropEvents = 0 usDropEvents = 0 dsOcts = 14395972 usOcts = 34376 dsPkts = 224922 usPkts = 669 dsBcastPkts = 0 usBcastPkts = 0 dsMcastPkts = 0 usMcastPkts = 0 dsCrcErrPkts = 0 usCrcErrPkts = 0 dsUnderSzPkts = 0 usUnderSzPkts = 0 dsOverSzPkts = 0 usOverSzPkts = 0 dsFragments = 0 usFragments = 0 dsJabbers = 0 usJabbers = 0 dsPkts_l64 = 0 dsPkts_64_127 = 224920 dsPkts_128_255 = 0 dsPkts_256_511 = 2 dsPkts_512_1023 = 0 dsPkts_1024_1518 = 0 usPkts_l64 = 0 usPkts_64_127 = 0 usPkts_128_255 = 0 usPkts_256_511 = 2 usPkts_512_1023 = 0 usPkts_1024_1518 = 0 dsDiscards = 0 usDiscards = 0 dsErr = 0 usErr = 0