config monitoring np6-ipsec-engine
|
This command is available for reference model(s) FortiGate 3000D, FortiGate 501E. It is not available for FortiGate 140E-POE, FortiGate VM64, FortiWiFi 61F. |
Configure NP6 IPsec engine status monitoring.
config monitoring np6-ipsec-engine
Description: Configure NP6 IPsec engine status monitoring.
set status [enable|disable]
set interval {integer}
set threshold {user}
end
config monitoring np6-ipsec-engine
|
Parameter |
Description |
Type |
Size |
Default |
||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
status |
Enable/disable NP6 IPsec engine status monitoring. |
option |
- |
disable |
||||||
|
|
|
|||||||||
|
interval |
IPsec engine status check interval . |
integer |
Minimum value: 1 Maximum value: 60 |
1 |
||||||
|
threshold |
IPsec engine status check threshold . Example: Log is generated if IPsec engine 0 is busy each of every 15 consecutive interval checks. |
user |
Not Specified |
|
||||||