config monitoring npu-hpe
This command is available for reference model(s) FortiGate 3000D, FortiGate 501E. It is not available for FortiGate 140E-POE, FortiGate VM64, FortiWiFi 61F. |
Configure npu-hpe status monitoring.
config monitoring npu-hpe
Description: Configure npu-hpe status monitoring.
set status [enable|disable]
set interval {integer}
set multipliers {user}
end
config monitoring npu-hpe
Parameter |
Description |
Type |
Size |
Default |
||||||
---|---|---|---|---|---|---|---|---|---|---|
status |
Enable/disable HPE status monitoring. |
option |
- |
disable |
||||||
|
|
|||||||||
interval |
HPE status check interval . |
integer |
Minimum value: 1 Maximum value: 60 |
1 |
||||||
multipliers |
HPE type interval multipliers . An event log is generated after every (interval * multiplier)seconds as configured for any HPE type when drops occur for that HPE type. An attack log is generated after every (4 * multiplier) number of continuous event logs. |
user |
Not Specified |
|