config wanopt auth-group
This command is available for reference model(s) FortiGate 3000D, FortiGate 501E, FortiGate VM64, FortiWiFi 61F. It is not available for FortiGate 140E-POE. |
Configure WAN optimization authentication groups.
config wanopt auth-group
Description: Configure WAN optimization authentication groups.
edit <name>
set auth-method [cert|psk]
set psk {password}
set cert {string}
set peer-accept [any|defined|...]
set peer {string}
next
end
config wanopt auth-group
Parameter |
Description |
Type |
Size |
Default |
||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
auth-method |
Select certificate or pre-shared key authentication for this authentication group. |
option |
- |
cert |
||||||||
|
|
|||||||||||
psk |
Pre-shared key used by the peers in this authentication group. |
password |
Not Specified |
|
||||||||
cert |
Name of certificate to identify this peer. |
string |
Maximum length: 35 |
|
||||||||
peer-accept |
Determine if this auth group accepts, any peer, a list of defined peers, or just one peer. |
option |
- |
any |
||||||||
|
|
|||||||||||
peer |
If peer-accept is set to one, select the name of one peer to add to this authentication group. The peer must have added with the wanopt peer command. |
string |
Maximum length: 35 |
|