diagnose npu np6lite npu-feature (verify enabled NP6Lite features)
You can use the diagnose npu np6lite npu-feature command to see the NP6Lite features that are enabled on your FortiGate and those that are not.
The following command output, from a FortiGate 200E, shows the default NP6Lite configuration for most FortiGates with NP6Lite processors:
diagnose npu np6 npu-feature
np_0 np_1
------------------- --------- ---------
Fastpath Enabled Enabled
IPv4 firewall Yes Yes
IPv6 firewall Yes Yes
IPv4 IPSec Yes Yes
IPv6 IPSec Yes Yes
IPv4 tunnel Yes Yes
IPv6 tunnel Yes Yes
GRE tunnel No No
If you use the following command to disable fastpath:
config system npu
set fastpath disable
end
The npu-feature command output show this configuration change:
diagnose npu np6 npu-feature
np_0 np_1
------------------- --------- ---------
Fastpath Disabled Disabled
IPv4 firewall Yes Yes
IPv6 firewall Yes Yes
IPv4 IPSec Yes Yes
IPv6 IPSec Yes Yes
IPv4 tunnel Yes Yes
IPv6 tunnel Yes Yes
GRE tunnel No No