Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

CLI Reference

config system pppoe-interface

Configure the PPPoE interfaces.

config system pppoe-interface

Description: Configure the PPPoE interfaces.

edit <name>

set dial-on-demand [enable|disable]

set ipv6 [enable|disable]

set device {string}

set username {string}

set password {password}

set auth-type [auto|pap|...]

set ipunnumbered {ipv4-address}

set pppoe-unnumbered-negotiate [enable|disable]

set idle-timeout {integer}

set disc-retry-timeout {integer}

set padt-retry-timeout {integer}

set service-name {string}

set ac-name {string}

set lcp-echo-interval {integer}

set lcp-max-echo-fails {integer}

next

end

config system pppoe-interface

Parameter

Description

Type

Size

Default

dial-on-demand

Enable/disable dial on demand to dial the PPPoE interface when packets are routed to the PPPoE interface.

option

-

disable

 

Option

Description

enable

Enable dial on demand.

disable

Disable dial on demand.

ipv6

Enable/disable IPv6 Control Protocol (IPv6CP).

option

-

disable

 

Option

Description

enable

Enable IPv6CP.

disable

Disable IPv6CP.

device

Name for the physical interface.

string

Maximum length: 15

username

User name.

string

Maximum length: 64

password

Enter the password.

password

Not Specified

auth-type

PPP authentication type to use.

option

-

auto

 

Option

Description

auto

Automatically choose the authentication method.

pap

PAP authentication.

chap

CHAP authentication.

mschapv1

MS-CHAPv1 authentication.

mschapv2

MS-CHAPv2 authentication.

ipunnumbered

PPPoE unnumbered IP.

ipv4-address

Not Specified

0.0.0.0

pppoe-unnumbered-negotiate

Enable/disable PPPoE unnumbered negotiation.

option

-

enable

 

Option

Description

enable

Enable PPPoE unnumbered negotiation.

disable

Disable PPPoE unnumbered negotiation.

idle-timeout

PPPoE auto disconnect after idle timeout (0-4294967295 sec).

integer

Minimum value: 0 Maximum value: 4294967295

0

disc-retry-timeout

PPPoE discovery init timeout value in (0-4294967295 sec).

integer

Minimum value: 0 Maximum value: 4294967295

1

padt-retry-timeout

PPPoE terminate timeout value in (0-4294967295 sec).

integer

Minimum value: 0 Maximum value: 4294967295

1

service-name

PPPoE service name.

string

Maximum length: 63

ac-name

PPPoE AC name.

string

Maximum length: 63

lcp-echo-interval

Time in seconds between PPPoE Link Control Protocol (LCP) echo requests.

integer

Minimum value: 0 Maximum value: 32767

5

lcp-max-echo-fails

Maximum missed LCP echo messages before disconnect.

integer

Minimum value: 0 Maximum value: 32767

3

config system pppoe-interface

Configure the PPPoE interfaces.

config system pppoe-interface

Description: Configure the PPPoE interfaces.

edit <name>

set dial-on-demand [enable|disable]

set ipv6 [enable|disable]

set device {string}

set username {string}

set password {password}

set auth-type [auto|pap|...]

set ipunnumbered {ipv4-address}

set pppoe-unnumbered-negotiate [enable|disable]

set idle-timeout {integer}

set disc-retry-timeout {integer}

set padt-retry-timeout {integer}

set service-name {string}

set ac-name {string}

set lcp-echo-interval {integer}

set lcp-max-echo-fails {integer}

next

end

config system pppoe-interface

Parameter

Description

Type

Size

Default

dial-on-demand

Enable/disable dial on demand to dial the PPPoE interface when packets are routed to the PPPoE interface.

option

-

disable

 

Option

Description

enable

Enable dial on demand.

disable

Disable dial on demand.

ipv6

Enable/disable IPv6 Control Protocol (IPv6CP).

option

-

disable

 

Option

Description

enable

Enable IPv6CP.

disable

Disable IPv6CP.

device

Name for the physical interface.

string

Maximum length: 15

username

User name.

string

Maximum length: 64

password

Enter the password.

password

Not Specified

auth-type

PPP authentication type to use.

option

-

auto

 

Option

Description

auto

Automatically choose the authentication method.

pap

PAP authentication.

chap

CHAP authentication.

mschapv1

MS-CHAPv1 authentication.

mschapv2

MS-CHAPv2 authentication.

ipunnumbered

PPPoE unnumbered IP.

ipv4-address

Not Specified

0.0.0.0

pppoe-unnumbered-negotiate

Enable/disable PPPoE unnumbered negotiation.

option

-

enable

 

Option

Description

enable

Enable PPPoE unnumbered negotiation.

disable

Disable PPPoE unnumbered negotiation.

idle-timeout

PPPoE auto disconnect after idle timeout (0-4294967295 sec).

integer

Minimum value: 0 Maximum value: 4294967295

0

disc-retry-timeout

PPPoE discovery init timeout value in (0-4294967295 sec).

integer

Minimum value: 0 Maximum value: 4294967295

1

padt-retry-timeout

PPPoE terminate timeout value in (0-4294967295 sec).

integer

Minimum value: 0 Maximum value: 4294967295

1

service-name

PPPoE service name.

string

Maximum length: 63

ac-name

PPPoE AC name.

string

Maximum length: 63

lcp-echo-interval

Time in seconds between PPPoE Link Control Protocol (LCP) echo requests.

integer

Minimum value: 0 Maximum value: 32767

5

lcp-max-echo-fails

Maximum missed LCP echo messages before disconnect.

integer

Minimum value: 0 Maximum value: 32767

3