Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

CLI Reference

config system vdom-sflow

Configure sFlow per VDOM to add or change the IP address and UDP port that FortiGate sFlow agents in this VDOM use to send sFlow datagrams to an sFlow collector.

config system vdom-sflow

Description: Configure sFlow per VDOM to add or change the IP address and UDP port that FortiGate sFlow agents in this VDOM use to send sFlow datagrams to an sFlow collector.

set vdom-sflow [enable|disable]

set collector-ip {ipv4-address}

set collector-port {integer}

set source-ip {ipv4-address}

end

config system vdom-sflow

Parameter

Description

Type

Size

Default

vdom-sflow

Enable/disable the sFlow configuration for the current VDOM.

option

-

disable

 

Option

Description

enable

Enable sFlow for this VDOM.

disable

Disable sFlow for this VDOM.

collector-ip

IP address of the sFlow collector that sFlow agents added to interfaces in this VDOM send sFlow datagrams to (default = 0.0.0.0).

ipv4-address

Not Specified

0.0.0.0

collector-port

UDP port number used for sending sFlow datagrams (configure only if required by your sFlow collector or your network configuration) (0 - 65535, default = 6343).

integer

Minimum value: 0 Maximum value: 65535

6343

source-ip

Source IP address for sFlow agent.

ipv4-address

Not Specified

0.0.0.0

config system vdom-sflow

Configure sFlow per VDOM to add or change the IP address and UDP port that FortiGate sFlow agents in this VDOM use to send sFlow datagrams to an sFlow collector.

config system vdom-sflow

Description: Configure sFlow per VDOM to add or change the IP address and UDP port that FortiGate sFlow agents in this VDOM use to send sFlow datagrams to an sFlow collector.

set vdom-sflow [enable|disable]

set collector-ip {ipv4-address}

set collector-port {integer}

set source-ip {ipv4-address}

end

config system vdom-sflow

Parameter

Description

Type

Size

Default

vdom-sflow

Enable/disable the sFlow configuration for the current VDOM.

option

-

disable

 

Option

Description

enable

Enable sFlow for this VDOM.

disable

Disable sFlow for this VDOM.

collector-ip

IP address of the sFlow collector that sFlow agents added to interfaces in this VDOM send sFlow datagrams to (default = 0.0.0.0).

ipv4-address

Not Specified

0.0.0.0

collector-port

UDP port number used for sending sFlow datagrams (configure only if required by your sFlow collector or your network configuration) (0 - 65535, default = 6343).

integer

Minimum value: 0 Maximum value: 65535

6343

source-ip

Source IP address for sFlow agent.

ipv4-address

Not Specified

0.0.0.0