Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

CLI Reference

Configure system-wide switch controller settings.

  config switch-controller system
      Description: Configure system-wide switch controller settings.
      set parallel-process-override [disable|enable]
      set parallel-process {integer}
      set data-sync-interval {integer}
      set iot-weight-threshold {integer}
      set iot-scan-interval {integer}
      set iot-holdoff {integer}
      set iot-mac-idle {integer}
  end

config switch-controller system

Parameter Name Description Type Size
parallel-process-override Enable/disable parallel process override.
disable: Disable maximum parallel process override.
enable: Enable maximum parallel process override.
option -
parallel-process Maximum number of parallel processes. integer Minimum value: 1 Maximum value: 300
data-sync-interval Time interval between collection of switch data (30 - 1800 sec, default = 60, 0 = disable). integer Minimum value: 30 Maximum value: 1800
iot-weight-threshold MAC entry's confidence value. Value is re-queried when below this value (default = 1, 0 = disable). integer Minimum value: 0 Maximum value: 255
iot-scan-interval IoT scan interval (2 - 10080 mins, default = 60 mins, 0 = disable). integer Minimum value: 2 Maximum value: 10080
iot-holdoff MAC entry's creation time. Time must be greater than this value for an entry to be created (0 - 10080 mins, default = 5 mins). integer Minimum value: 0 Maximum value: 10080
iot-mac-idle MAC entry's idle time. MAC entry is removed after this value (0 - 10080 mins, default = 1440 mins). integer Minimum value: 0 Maximum value: 10080

Configure system-wide switch controller settings.

  config switch-controller system
      Description: Configure system-wide switch controller settings.
      set parallel-process-override [disable|enable]
      set parallel-process {integer}
      set data-sync-interval {integer}
      set iot-weight-threshold {integer}
      set iot-scan-interval {integer}
      set iot-holdoff {integer}
      set iot-mac-idle {integer}
  end

config switch-controller system

Parameter Name Description Type Size
parallel-process-override Enable/disable parallel process override.
disable: Disable maximum parallel process override.
enable: Enable maximum parallel process override.
option -
parallel-process Maximum number of parallel processes. integer Minimum value: 1 Maximum value: 300
data-sync-interval Time interval between collection of switch data (30 - 1800 sec, default = 60, 0 = disable). integer Minimum value: 30 Maximum value: 1800
iot-weight-threshold MAC entry's confidence value. Value is re-queried when below this value (default = 1, 0 = disable). integer Minimum value: 0 Maximum value: 255
iot-scan-interval IoT scan interval (2 - 10080 mins, default = 60 mins, 0 = disable). integer Minimum value: 2 Maximum value: 10080
iot-holdoff MAC entry's creation time. Time must be greater than this value for an entry to be created (0 - 10080 mins, default = 5 mins). integer Minimum value: 0 Maximum value: 10080
iot-mac-idle MAC entry's idle time. MAC entry is removed after this value (0 - 10080 mins, default = 1440 mins). integer Minimum value: 0 Maximum value: 10080