Fortinet white logo
Fortinet docs logo DOCUMENT LIBRARY
Fortinet white logo
Fortinet docs logo DOCUMENT LIBRARY
Products Best Practices Hardware Guides Products A-Z
Summary
By Solution
By 4D Pillars
By Cloud
Secure Networking
Unified SASE
Security Operations
Secure SD-WAN
Secure Access Service Edge (SASE)
ZTNA
LAN Edge
Identity and Access Management
Next Generation Firewall
Public Cloud
Private Cloud
FortiCloud
Secure Networking
  • Hybrid Mesh Firewall
  • NOC Management
  • LAN
  • WAN
    • More >>
    Unified SASE
  • Single Vendor SASE
  • Cloud Network Security
  • Secure Endpoint Connectivity
  • Web Application / API Protection
    • More >>
    Security Operations
  • Security Operations Automation
  • Identity
  • Early Detection & Prevention
    • More >>
    Secure Networking
  • Hybrid Mesh Firewall
  • NOC Management
  • LAN
  • WAN
  • Communication & Surveillance
    • Unified SASE
  • Single Vendor SASE
  • Secure Endpoint Connectivity
  • Cloud Network Security
  • Cloud-Native Security
  • Web Application / API Protection
    • Security Operations
  • Security Operations Automation
  • Endpoint
  • Data Protection
  • Identity
  • Email
  • Early Detection & Prevention
  • Expert Services
  • Edge Firewall
  • Orchestration & management
  • SD Branch
  • Application Delivery
  • Single Vendor SASE
  • Secure Endpoint Connectivity
  • Secure Private Access
  • Thin Edge
  • Identity
  • Application Gateway
  • Enterprise Asset Management
  • Endpoint Agent
  • Agentless Security Posture
  • Identity
  • Wireless
  • Switching
  • Identity
  • Privilege Acccess Management
  • Next Generation Firewall
  • Orchestration & management
  • Expert Services
  • All
  • All
  • Account Management
  • SAAS Management
  • SAAS Application Security
  • Managed Services
  • Platform as a service (PAAS)
  • Other SAAS Services
    • 4D Resources
    Solution Hubs
  • 4D Pillars
  • Cloud
  • Popular Solutions

    • CLI Reference

    6.4.3
    7.6.0
    7.4.5
    7.4.4
    7.4.3
    7.4.2
    7.4.1
    7.4.0
    7.2.10
    7.2.9
    7.2.8
    7.2.7
    7.2.6
    7.2.5
    7.2.4
    7.2.3
    7.2.2
    7.2.1
    7.2.0
    7.0.16
    7.0.15
    7.0.14
    7.0.13
    7.0.12
    7.0.11
    7.0.10
    7.0.9
    7.0.8
    7.0.7
    7.0.6
    7.0.5
    7.0.4
    7.0.3
    7.0.2
    7.0.1
    7.0.0
    6.4.15
    6.4.14
    6.4.13
    6.4.12
    6.4.11
    6.4.10
    6.4.9
    6.4.8
    6.4.7
    6.4.6
    6.4.5
    6.4.4
    6.4.3
    6.4.2
    6.4.1
    6.4.0
    6.2.16
    6.2.15
    6.2.14
    6.2.13
    6.2.12
    6.2.11
    6.2.10
    6.2.9
    6.2.8
    6.2.7
    6.2.6
    6.2.5
    6.2.4
    6.2.3
    6.2.2
    6.2.1
    6.0.0
    5.6.0
    5.4.0
    5.2.0
    5.0.0

    wireless-controller snmp

    Configure SNMP.

      config wireless-controller snmp
      Description: Configure SNMP.
      set engine-id {string}
      set contact-info {string}
      set trap-high-cpu-threshold {integer}
      set trap-high-mem-threshold {integer}
      config community
          Description: SNMP Community Configuration.
          edit <id>
              set name {string}
              set status [enable|disable]
              set query-v1-status [enable|disable]
              set query-v2c-status [enable|disable]
              set trap-v1-status [enable|disable]
              set trap-v2c-status [enable|disable]
              config hosts
                  Description: Configure IPv4 SNMP managers (hosts).
                  edit <id>
                      set ip {user}
                  next
              end
          next
      end
      config user
          Description: SNMP User Configuration.
          edit <name>
              set status [enable|disable]
              set queries [enable|disable]
              set trap-status [enable|disable]
              set security-level [no-auth-no-priv|auth-no-priv|...]
              set auth-proto [md5|sha]
              set auth-pwd {password}
              set priv-proto [aes|des|...]
              set priv-pwd {password}
              set notify-hosts {ipv4-address}
          next
      end
  end

    config wireless-controller snmp

    Parameter Name Description Type Size
    engine-id AC SNMP engineId string (maximum 24 characters). string Maximum length: 23
    contact-info Contact Information. string Maximum length: 31
    trap-high-cpu-threshold CPU usage when trap is sent. integer Minimum value: 10 Maximum value: 100
    trap-high-mem-threshold Memory usage when trap is sent. integer Minimum value: 10 Maximum value: 100

    config community

    Parameter Name Description Type Size
    name Community name. string Maximum length: 35
    status Enable/disable this SNMP community.
    enable: Enable setting.
    disable: Disable setting.
    		 option -
    query-v1-status Enable/disable SNMP v1 queries.
    enable: Enable setting.
    disable: Disable setting.
    		 option -
    query-v2c-status Enable/disable SNMP v2c queries.
    enable: Enable setting.
    disable: Disable setting.
    		 option -
    trap-v1-status Enable/disable SNMP v1 traps.
    enable: Enable setting.
    disable: Disable setting.
    		 option -
    trap-v2c-status Enable/disable SNMP v2c traps.
    enable: Enable setting.
    disable: Disable setting.
    		 option -

    config hosts

    Parameter Name Description Type Size
    ip IPv4 address of the SNMP manager (host). user Not Specified

    config user

    Parameter Name Description Type Size
    status SNMP User Enable
    enable: Enable setting.
    disable: Disable setting.
    		 option -
    queries Enable/disable SNMP queries for this user.
    enable: Enable setting.
    disable: Disable setting.
    		 option -
    trap-status Enable/disable traps for this SNMP user.
    enable: Enable setting.
    disable: Disable setting.
    		 option -
    security-level Security level for message authentication and encryption.
    no-auth-no-priv: Message with no authentication and no privacy (encryption).
    auth-no-priv: Message with authentication but no privacy (encryption).
    auth-priv: Message with authentication and privacy (encryption).
    		 option -
    auth-proto Authentication protocol.
    md5: HMAC-MD5-96 authentication protocol.
    sha: HMAC-SHA-96 authentication protocol.
    		 option -
    auth-pwd Password for authentication protocol. password Not Specified
    priv-proto Privacy (encryption) protocol.
    aes: CFB128-AES-128 symmetric encryption protocol.
    des: CBC-DES symmetric encryption protocol.
    aes256: CFB128-AES-256 symmetric encryption protocol.
    aes256cisco: CFB128-AES-256 symmetric encryption protocol compatible with CISCO.
    		 option -
    priv-pwd Password for privacy (encryption) protocol. password Not Specified
    notify-hosts Configure SNMP User Notify Hosts. ipv4-address Not Specified
    Previous
    Next

    wireless-controller snmp

    Configure SNMP.

      config wireless-controller snmp
      Description: Configure SNMP.
      set engine-id {string}
      set contact-info {string}
      set trap-high-cpu-threshold {integer}
      set trap-high-mem-threshold {integer}
      config community
          Description: SNMP Community Configuration.
          edit <id>
              set name {string}
              set status [enable|disable]
              set query-v1-status [enable|disable]
              set query-v2c-status [enable|disable]
              set trap-v1-status [enable|disable]
              set trap-v2c-status [enable|disable]
              config hosts
                  Description: Configure IPv4 SNMP managers (hosts).
                  edit <id>
                      set ip {user}
                  next
              end
          next
      end
      config user
          Description: SNMP User Configuration.
          edit <name>
              set status [enable|disable]
              set queries [enable|disable]
              set trap-status [enable|disable]
              set security-level [no-auth-no-priv|auth-no-priv|...]
              set auth-proto [md5|sha]
              set auth-pwd {password}
              set priv-proto [aes|des|...]
              set priv-pwd {password}
              set notify-hosts {ipv4-address}
          next
      end
  end

    config wireless-controller snmp

    Parameter Name Description Type Size
    engine-id AC SNMP engineId string (maximum 24 characters). string Maximum length: 23
    contact-info Contact Information. string Maximum length: 31
    trap-high-cpu-threshold CPU usage when trap is sent. integer Minimum value: 10 Maximum value: 100
    trap-high-mem-threshold Memory usage when trap is sent. integer Minimum value: 10 Maximum value: 100

    config community

    Parameter Name Description Type Size
    name Community name. string Maximum length: 35
    status Enable/disable this SNMP community.
    enable: Enable setting.
    disable: Disable setting.
    		 option -
    query-v1-status Enable/disable SNMP v1 queries.
    enable: Enable setting.
    disable: Disable setting.
    		 option -
    query-v2c-status Enable/disable SNMP v2c queries.
    enable: Enable setting.
    disable: Disable setting.
    		 option -
    trap-v1-status Enable/disable SNMP v1 traps.
    enable: Enable setting.
    disable: Disable setting.
    		 option -
    trap-v2c-status Enable/disable SNMP v2c traps.
    enable: Enable setting.
    disable: Disable setting.
    		 option -

    config hosts

    Parameter Name Description Type Size
    ip IPv4 address of the SNMP manager (host). user Not Specified

    config user

    Parameter Name Description Type Size
    status SNMP User Enable
    enable: Enable setting.
    disable: Disable setting.
    		 option -
    queries Enable/disable SNMP queries for this user.
    enable: Enable setting.
    disable: Disable setting.
    		 option -
    trap-status Enable/disable traps for this SNMP user.
    enable: Enable setting.
    disable: Disable setting.
    		 option -
    security-level Security level for message authentication and encryption.
    no-auth-no-priv: Message with no authentication and no privacy (encryption).
    auth-no-priv: Message with authentication but no privacy (encryption).
    auth-priv: Message with authentication and privacy (encryption).
    		 option -
    auth-proto Authentication protocol.
    md5: HMAC-MD5-96 authentication protocol.
    sha: HMAC-SHA-96 authentication protocol.
    		 option -
    auth-pwd Password for authentication protocol. password Not Specified
    priv-proto Privacy (encryption) protocol.
    aes: CFB128-AES-128 symmetric encryption protocol.
    des: CBC-DES symmetric encryption protocol.
    aes256: CFB128-AES-256 symmetric encryption protocol.
    aes256cisco: CFB128-AES-256 symmetric encryption protocol compatible with CISCO.
    		 option -
    priv-pwd Password for privacy (encryption) protocol. password Not Specified
    notify-hosts Configure SNMP User Notify Hosts. ipv4-address Not Specified
    Previous
    Next