WiFi client monitor
The following shows a simple network topology when using FortiAPs with FortiGate:
To view connected WiFi clients on the FortiGate unit, go to Monitor > WiFi Client Monitor. The following columns display:
|
Column |
Description |
|---|---|
|
SSID |
SSID that the client connected to, such as the tunnel, bridge, or mesh. |
|
FortiAP |
Serial number of the FortiAP unit that the client connected to. |
|
User |
Username if using WPA enterprise authentication. |
|
IP |
IP address assigned to the wireless client. |
|
Device |
Wireless client device type. |
|
Channel |
FortiAP operation channel. |
|
Auth |
Authentication type used. |
|
Channel |
WiFi radio channel in use. |
|
Bandwidth Tx/Rx |
Client received and transmitted bandwidth in Kbps. |
|
Signal Strength/Noise |
Signal-to-noise ratio in decibels calculated from signal strength and noise level. |
|
Association Time |
How long the client has been connected to this AP. |
|
Device OS |
Wireless device OS. |
|
Manufacturer |
Wireless device manufacturer. |
|
MIMO |
Wireless device MIMO information. |
