config monitoring npu-hpe
Description: Configure npu-hpe status monitoring.
set status [enable|disable]
set interval {integer}
set multipliers {user}
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| status | Enable/disable HPE status monitoring. enable: Enable setting. disable: Disable setting. |
option | - |
| interval | HPE status check interval (1 - 60 seconds, default = 1 second). | integer | Minimum value: 1 Maximum value: 60 |
| multipliers | HPE type interval multipliers (12 integers from to , default = 4, 4, 4, 4, 8, 8, 8, 8, 8, 8, 8, 8). |
An event log is generated after every (interval multiplier)seconds as configured for any HPE type when drops occur for that HPE type. An attack log is generated after every (4 multiplier) number of continuous event logs. |user |Not Specified
config monitoring npu-hpe
Description: Configure npu-hpe status monitoring.
set status [enable|disable]
set interval {integer}
set multipliers {user}
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| status | Enable/disable HPE status monitoring. enable: Enable setting. disable: Disable setting. |
option | - |
| interval | HPE status check interval (1 - 60 seconds, default = 1 second). | integer | Minimum value: 1 Maximum value: 60 |
| multipliers | HPE type interval multipliers (12 integers from to , default = 4, 4, 4, 4, 8, 8, 8, 8, 8, 8, 8, 8). |
An event log is generated after every (interval multiplier)seconds as configured for any HPE type when drops occur for that HPE type. An attack log is generated after every (4 multiplier) number of continuous event logs. |user |Not Specified