Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

CLI Reference

Configure npu-hpe status monitoring.

  config monitoring npu-hpe
      Description: Configure npu-hpe status monitoring.
      set status [enable|disable]
      set interval {integer}
      set multipliers {user}
  end

config monitoring npu-hpe

Parameter Name Description Type Size
status Enable/disable HPE status monitoring.
enable: Enable setting.
disable: Disable setting.
option -
interval HPE status check interval (1 - 60 seconds, default = 1 second). integer Minimum value: 1 Maximum value: 60
multipliers HPE type interval multipliers (12 integers from to , default = 4, 4, 4, 4, 8, 8, 8, 8, 8, 8, 8, 8).

An event log is generated after every (interval multiplier)seconds as configured for any HPE type when drops occur for that HPE type. An attack log is generated after every (4 multiplier) number of continuous event logs. |user |Not Specified

Configure npu-hpe status monitoring.

  config monitoring npu-hpe
      Description: Configure npu-hpe status monitoring.
      set status [enable|disable]
      set interval {integer}
      set multipliers {user}
  end

config monitoring npu-hpe

Parameter Name Description Type Size
status Enable/disable HPE status monitoring.
enable: Enable setting.
disable: Disable setting.
option -
interval HPE status check interval (1 - 60 seconds, default = 1 second). integer Minimum value: 1 Maximum value: 60
multipliers HPE type interval multipliers (12 integers from to , default = 4, 4, 4, 4, 8, 8, 8, 8, 8, 8, 8, 8).

An event log is generated after every (interval multiplier)seconds as configured for any HPE type when drops occur for that HPE type. An attack log is generated after every (4 multiplier) number of continuous event logs. |user |Not Specified