Fortinet black logo

Cookbook

Results

Copy Link
Copy Doc ID 5be0d1a4-3f0d-11eb-96b9-00505692583a:823480
Download PDF

Results

The following GUI pages show the function of the SD-WAN and can be used to confirm that it is setup and running correctly:

Interface usage

Go to Network > SD-WAN to review the SD-WAN interfaces' statuses.

Bandwidth

Select Bandwidth to view the amount of downloaded and uploaded data for each interface.

Volume

Select Volume to see pie charts of the received and sent bytes on the interfaces.

Sessions

Select Sessions to see a pie chart of the number of active sessions on each interface.

Performance SLA

Go to Network > Performance SLA and select the SLA from the table (server in this example) to view the packet loss, latency, and jitter on each SD-WAN member in the health check server.

Packet loss

Select Packet Loss to see the percentage of packets lost for each member.

Latency

Select Latency to see the current latency, in milliseconds, for each member.

Jitter

Select Jitter to see the jitter, in milliseconds, for each member.

Routing table

Go to Monitor > Routing Monitor and to review all static and dynamic routes.

Interface monitor

Go to Monitor > SD-WAN Monitor to review interface status, sessions, and usage.

Firewall policy

Go to Policy & Objects > IPv4 Policy to review the SD-WAN policy.

Results

The following GUI pages show the function of the SD-WAN and can be used to confirm that it is setup and running correctly:

Interface usage

Go to Network > SD-WAN to review the SD-WAN interfaces' statuses.

Bandwidth

Select Bandwidth to view the amount of downloaded and uploaded data for each interface.

Volume

Select Volume to see pie charts of the received and sent bytes on the interfaces.

Sessions

Select Sessions to see a pie chart of the number of active sessions on each interface.

Performance SLA

Go to Network > Performance SLA and select the SLA from the table (server in this example) to view the packet loss, latency, and jitter on each SD-WAN member in the health check server.

Packet loss

Select Packet Loss to see the percentage of packets lost for each member.

Latency

Select Latency to see the current latency, in milliseconds, for each member.

Jitter

Select Jitter to see the jitter, in milliseconds, for each member.

Routing table

Go to Monitor > Routing Monitor and to review all static and dynamic routes.

Interface monitor

Go to Monitor > SD-WAN Monitor to review interface status, sessions, and usage.

Firewall policy

Go to Policy & Objects > IPv4 Policy to review the SD-WAN policy.