config system link-monitor
Configure Link Health Monitor.
config system link-monitor
Description: Configure Link Health Monitor.
edit <name>
set addr-mode [ipv4|ipv6]
set failtime {integer}
set gateway-ip {ipv4-address-any}
set gateway-ip6 {ipv6-address}
set ha-priority {integer}
set http-agent {string}
set http-get {string}
set http-match {string}
set interval {integer}
set packet-size {integer}
set password {password}
set port {integer}
set probe-timeout {integer}
set protocol {option1}, {option2}, ...
set recoverytime {integer}
set security-mode [none|authentication]
set server <address1>, <address2>, ...
set source-ip {ipv4-address-any}
set source-ip6 {ipv6-address}
set srcintf {string}
set status [enable|disable]
set update-cascade-interface [enable|disable]
set update-static-route [enable|disable]
next
end
config system link-monitor
|
Parameter |
Description |
Type |
Size |
|||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
addr-mode |
Address mode (IPv4 or IPv6). |
option |
- |
|||||||||||||||
|
|
|
|||||||||||||||||
|
failtime |
Number of retry attempts before the server is considered down |
integer |
Minimum value: 1 Maximum value: 3600 |
|||||||||||||||
|
gateway-ip |
Gateway IP address used to probe the server. |
ipv4-address-any |
Not Specified |
|||||||||||||||
|
gateway-ip6 |
Gateway IPv6 address used to probe the server. |
ipv6-address |
Not Specified |
|||||||||||||||
|
ha-priority |
HA election priority. |
integer |
Minimum value: 1 Maximum value: 50 |
|||||||||||||||
|
http-agent |
String in the http-agent field in the HTTP header. |
string |
Maximum length: 1024 |
|||||||||||||||
|
http-get |
If you are monitoring an HTML server you can send an HTTP-GET request with a custom string. Use this option to define the string. |
string |
Maximum length: 1024 |
|||||||||||||||
|
http-match |
String that you expect to see in the HTTP-GET requests of the traffic to be monitored. |
string |
Maximum length: 1024 |
|||||||||||||||
|
interval |
Detection interval in milliseconds. |
integer |
Minimum value: 500 Maximum value: 3600000 |
|||||||||||||||
|
name |
Link monitor name. |
string |
Maximum length: 35 |
|||||||||||||||
|
packet-size |
Packet size of a twamp test session, |
integer |
Minimum value: 64 Maximum value: 1024 |
|||||||||||||||
|
password |
Twamp controller password in authentication mode |
password |
Not Specified |
|||||||||||||||
|
port |
Port number of the traffic to be used to monitor the server. |
integer |
Minimum value: 1 Maximum value: 65535 |
|||||||||||||||
|
probe-timeout |
Time to wait before a probe packet is considered lost. |
integer |
Minimum value: 500 Maximum value: 5000 |
|||||||||||||||
|
protocol |
Protocols used to monitor the server. |
option |
- |
|||||||||||||||
|
|
|
|||||||||||||||||
|
recoverytime |
Number of successful responses received before server is considered recovered. |
integer |
Minimum value: 1 Maximum value: 3600 |
|||||||||||||||
|
security-mode |
Twamp controller security mode. |
option |
- |
|||||||||||||||
|
|
|
|||||||||||||||||
|
server |
IP address of the server(s) to be monitored. Server address. |
string |
Maximum length: 79 |
|||||||||||||||
|
source-ip |
Source IP address used in packet to the server. |
ipv4-address-any |
Not Specified |
|||||||||||||||
|
source-ip6 |
Source IPv6 address used in packet to the server. |
ipv6-address |
Not Specified |
|||||||||||||||
|
srcintf |
Interface that receives the traffic to be monitored. |
string |
Maximum length: 15 |
|||||||||||||||
|
status |
Enable/disable this link monitor. |
option |
- |
|||||||||||||||
|
|
|
|||||||||||||||||
|
update-cascade-interface |
Enable/disable update cascade interface. |
option |
- |
|||||||||||||||
|
|
|
|||||||||||||||||
|
update-static-route |
Enable/disable updating the static route. |
option |
- |
|||||||||||||||
|
|
|
|||||||||||||||||