config router ospf6

Configure IPv6 OSPF.

config router ospf6
    Description: Configure IPv6 OSPF.
    set abr-type [cisco|ibm|...]
    config area
        Description: OSPF6 area configuration.
        edit <id>
            set default-cost {integer}
            set nssa-translator-role [candidate|never|...]
            set stub-type [no-summary|summary]
            set type [regular|nssa|...]
            set nssa-default-information-originate [enable|disable]
            set nssa-default-information-originate-metric {integer}
            set nssa-default-information-originate-metric-type [1|2]
            set nssa-redistribution [enable|disable]
            set authentication [none|ah|...]
            set key-rollover-interval {integer}
            set ipsec-auth-alg [md5|sha1|...]
            set ipsec-enc-alg [null|des|...]
            config ipsec-keys
                Description: IPsec authentication and encryption keys.
                edit <spi>
                    set auth-key {password}
                    set enc-key {password}
                next
            end
            config range
                Description: OSPF6 area range configuration.
                edit <id>
                    set prefix6 {ipv6-network}
                    set advertise [disable|enable]
                next
            end
            config virtual-link
                Description: OSPF6 virtual link configuration.
                edit <name>
                    set dead-interval {integer}
                    set hello-interval {integer}
                    set retransmit-interval {integer}
                    set transmit-delay {integer}
                    set peer {ipv4-address-any}
                    set authentication [none|ah|...]
                    set key-rollover-interval {integer}
                    set ipsec-auth-alg [md5|sha1|...]
                    set ipsec-enc-alg [null|des|...]
                    config ipsec-keys
                        Description: IPsec authentication and encryption keys.
                        edit <spi>
                            set auth-key {password}
                            set enc-key {password}
                        next
                    end
                next
            end
        next
    end
    set auto-cost-ref-bandwidth {integer}
    set bfd [enable|disable]
    set default-information-metric {integer}
    set default-information-metric-type [1|2]
    set default-information-originate [enable|always|...]
    set default-information-route-map {string}
    set default-metric {integer}
    set log-neighbour-changes [enable|disable]
    config ospf6-interface
        Description: OSPF6 interface configuration.
        edit <name>
            set area-id {ipv4-address-any}
            set interface {string}
            set retransmit-interval {integer}
            set transmit-delay {integer}
            set cost {integer}
            set priority {integer}
            set dead-interval {integer}
            set hello-interval {integer}
            set status [disable|enable]
            set network-type [broadcast|point-to-point|...]
            set bfd [global|enable|...]
            set mtu {integer}
            set mtu-ignore [enable|disable]
            set authentication [none|ah|...]
            set key-rollover-interval {integer}
            set ipsec-auth-alg [md5|sha1|...]
            set ipsec-enc-alg [null|des|...]
            config ipsec-keys
                Description: IPsec authentication and encryption keys.
                edit <spi>
                    set auth-key {password}
                    set enc-key {password}
                next
            end
            config neighbor
                Description: OSPFv3 neighbors are used when OSPFv3 runs on non-broadcast media
                edit <ip6>
                    set poll-interval {integer}
                    set cost {integer}
                    set priority {integer}
                next
            end
        next
    end
    set passive-interface <name1>, <name2>, ...
    config redistribute
        Description: Redistribute configuration.
        edit <name>
            set status [enable|disable]
            set metric {integer}
            set routemap {string}
            set metric-type [1|2]
        next
    end
    set router-id {ipv4-address-any}
    set spf-timers {user}
    config summary-address
        Description: IPv6 address summary configuration.
        edit <id>
            set prefix6 {ipv6-network}
            set advertise [disable|enable]
            set tag {integer}
        next
    end
end

config router ospf6

Parameter	Description	Type	Size
abr-type	Area border router type.	option	-
	Option Description cisco Cisco. ibm IBM. standard Standard.
auto-cost-ref-bandwidth	Reference bandwidth in terms of megabits per second.	integer	Minimum value: 1 Maximum value: 1000000
bfd	Enable/disable Bidirectional Forwarding Detection (BFD).	option	-
	Option Description enable Enable Bidirectional Forwarding Detection (BFD). disable Disable Bidirectional Forwarding Detection (BFD).
default-information-metric	Default information metric.	integer	Minimum value: 1 Maximum value: 16777214
default-information-metric-type	Default information metric type.	option	-
	Option Description 1 Type 1. 2 Type 2.
default-information-originate	Enable/disable generation of default route.	option	-
	Option Description enable Enable setting. always Always advertise the default router. disable Disable setting.
default-information-route-map	Default information route map.	string	Maximum length: 35
default-metric	Default metric of redistribute routes.	integer	Minimum value: 1 Maximum value: 16777214
log-neighbour-changes	Enable logging of OSPFv3 neighbour's changes	option	-
	Option Description enable Enable setting. disable Disable setting.
passive-interface <name>	Passive interface configuration. Passive interface name.	string	Maximum length: 79
router-id	A.B.C.D, in IPv4 address format.	ipv4-address-any	Not Specified
spf-timers	SPF calculation frequency.	user	Not Specified

config area

Parameter	Description	Type	Size
id	Area entry IP address.	ipv4-address-any	Not Specified
default-cost	Summary default cost of stub or NSSA area.	integer	Minimum value: 0 Maximum value: 16777215
nssa-translator-role	NSSA translator role type.	option	-
	Option Description candidate Candidate. never Never. always Always.
stub-type	Stub summary setting.	option	-
	Option Description no-summary No summary. summary Summary.
type	Area type setting.	option	-
	Option Description regular Regular. nssa NSSA. stub Stub.
nssa-default-information-originate	Enable/disable originate type 7 default into NSSA area.	option	-
	Option Description enable Enable originate type 7 default into NSSA area. disable Disable originate type 7 default into NSSA area.
nssa-default-information-originate-metric	OSPFv3 default metric.	integer	Minimum value: 0 Maximum value: 16777214
nssa-default-information-originate-metric-type	OSPFv3 metric type for default routes.	option	-
	Option Description 1 Type 1. 2 Type 2.
nssa-redistribution	Enable/disable redistribute into NSSA area.	option	-
	Option Description enable Enable redistribute into NSSA area. disable Disable redistribute into NSSA area.
authentication	Authentication mode.	option	-
	Option Description none Disable authentication. ah Authentication Header. esp Encapsulating Security Payload.
key-rollover-interval	Key roll-over interval.	integer	Minimum value: 300 Maximum value: 216000
ipsec-auth-alg	Authentication algorithm.	option	-
	Option Description md5 MD5. sha1 SHA1. sha256 SHA256. sha384 SHA384. sha512 SHA512.
ipsec-enc-alg	Encryption algorithm.	option	-
	Option Description null No encryption. des DES. 3des 3DES. aes128 AES128. aes192 AES192. aes256 AES256.

config ipsec-keys

Parameter	Description	Type	Size
spi	Security Parameters Index.	integer	Minimum value: 256 Maximum value: 4294967295
auth-key	Authentication key.	password	Not Specified
enc-key	Encryption key.	password	Not Specified

config ipsec-keys

Parameter	Description	Type	Size
spi	Security Parameters Index.	integer	Minimum value: 256 Maximum value: 4294967295
auth-key	Authentication key.	password	Not Specified
enc-key	Encryption key.	password	Not Specified

config range

Parameter	Description	Type	Size
id	Range entry ID.	integer	Minimum value: 0 Maximum value: 4294967295
prefix6	IPv6 prefix.	ipv6-network	Not Specified
advertise	Enable/disable advertise status.	option	-
	Option Description disable disable enable enable

config virtual-link

Parameter	Description	Type	Size
name	Virtual link entry name.	string	Maximum length: 35
dead-interval	Dead interval.	integer	Minimum value: 1 Maximum value: 65535
hello-interval	Hello interval.	integer	Minimum value: 1 Maximum value: 65535
retransmit-interval	Retransmit interval.	integer	Minimum value: 1 Maximum value: 65535
transmit-delay	Transmit delay.	integer	Minimum value: 1 Maximum value: 65535
peer	A.B.C.D, peer router ID.	ipv4-address-any	Not Specified
authentication	Authentication mode.	option	-
	Option Description none Disable authentication. ah Authentication Header. esp Encapsulating Security Payload. area Use the routing area's authentication configuration.
key-rollover-interval	Key roll-over interval.	integer	Minimum value: 300 Maximum value: 216000
ipsec-auth-alg	Authentication algorithm.	option	-
	Option Description md5 MD5. sha1 SHA1. sha256 SHA256. sha384 SHA384. sha512 SHA512.
ipsec-enc-alg	Encryption algorithm.	option	-
	Option Description null No encryption. des DES. 3des 3DES. aes128 AES128. aes192 AES192. aes256 AES256.

config ipsec-keys

Parameter	Description	Type	Size
spi	Security Parameters Index.	integer	Minimum value: 256 Maximum value: 4294967295
auth-key	Authentication key.	password	Not Specified
enc-key	Encryption key.	password	Not Specified

config ipsec-keys

Parameter	Description	Type	Size
spi	Security Parameters Index.	integer	Minimum value: 256 Maximum value: 4294967295
auth-key	Authentication key.	password	Not Specified
enc-key	Encryption key.	password	Not Specified

config ospf6-interface

Parameter	Description	Type	Size
name	Interface entry name.	string	Maximum length: 35
area-id	A.B.C.D, in IPv4 address format.	ipv4-address-any	Not Specified
interface	Configuration interface name.	string	Maximum length: 15
retransmit-interval	Retransmit interval.	integer	Minimum value: 1 Maximum value: 65535
transmit-delay	Transmit delay.	integer	Minimum value: 1 Maximum value: 65535
cost	Cost of the interface, value range from 0 to 65535, 0 means auto-cost.	integer	Minimum value: 0 Maximum value: 65535
priority	priority	integer	Minimum value: 0 Maximum value: 255
dead-interval	Dead interval.	integer	Minimum value: 1 Maximum value: 65535
hello-interval	Hello interval.	integer	Minimum value: 1 Maximum value: 65535
status	Enable/disable OSPF6 routing on this interface.	option	-
	Option Description disable Disable OSPF6 routing. enable Enable OSPF6 routing.
network-type	Network type.	option	-
	Option Description broadcast broadcast point-to-point point-to-point non-broadcast non-broadcast point-to-multipoint point-to-multipoint point-to-multipoint-non-broadcast point-to-multipoint and non-broadcast.
bfd	Enable/disable Bidirectional Forwarding Detection (BFD).	option	-
	Option Description global Use global configuration of Bidirectional Forwarding Detection (BFD). enable Enable Bidirectional Forwarding Detection (BFD) on this interface. disable Disable Bidirectional Forwarding Detection (BFD) on this interface.
mtu	MTU for OSPFv3 packets.	integer	Minimum value: 576 Maximum value: 65535
mtu-ignore	Enable/disable ignoring MTU field in DBD packets.	option	-
	Option Description enable Ignore MTU field in DBD packets. disable Do not ignore MTU field in DBD packets.
authentication	Authentication mode.	option	-
	Option Description none Disable authentication. ah Authentication Header. esp Encapsulating Security Payload. area Use the routing area's authentication configuration.
key-rollover-interval	Key roll-over interval.	integer	Minimum value: 300 Maximum value: 216000
ipsec-auth-alg	Authentication algorithm.	option	-
	Option Description md5 MD5. sha1 SHA1. sha256 SHA256. sha384 SHA384. sha512 SHA512.
ipsec-enc-alg	Encryption algorithm.	option	-
	Option Description null No encryption. des DES. 3des 3DES. aes128 AES128. aes192 AES192. aes256 AES256.

config ipsec-keys

Parameter	Description	Type	Size
spi	Security Parameters Index.	integer	Minimum value: 256 Maximum value: 4294967295
auth-key	Authentication key.	password	Not Specified
enc-key	Encryption key.	password	Not Specified

config ipsec-keys

Parameter	Description	Type	Size
spi	Security Parameters Index.	integer	Minimum value: 256 Maximum value: 4294967295
auth-key	Authentication key.	password	Not Specified
enc-key	Encryption key.	password	Not Specified

config neighbor

Parameter	Description	Type	Size
ip6	IPv6 link local address of the neighbor.	ipv6-address	Not Specified
poll-interval	Poll interval time in seconds.	integer	Minimum value: 1 Maximum value: 65535
cost	Cost of the interface, value range from 0 to 65535, 0 means auto-cost.	integer	Minimum value: 0 Maximum value: 65535
priority	priority	integer	Minimum value: 0 Maximum value: 255

config redistribute

Parameter	Description	Type	Size
name	Redistribute name.	string	Maximum length: 35
status	status	option	-
	Option Description enable Enable setting. disable Disable setting.
metric	Redistribute metric setting.	integer	Minimum value: 0 Maximum value: 16777214
routemap	Route map name.	string	Maximum length: 35
metric-type	Metric type.	option	-
	Option Description 1 Type 1. 2 Type 2.

config summary-address

Parameter	Description	Type	Size
id	Summary address entry ID.	integer	Minimum value: 0 Maximum value: 4294967295
prefix6	IPv6 prefix.	ipv6-network	Not Specified
advertise	Enable/disable advertise status.	option	-
	Option Description disable disable enable enable
tag	Tag value.	integer	Minimum value: 0 Maximum value: 4294967295