Removing an NSX-T connector

If you no longer need the NSX-T connector configuration, you can remove it.

To remove an NSX-T connector:

1. In FortiManager, go to Fabric View in the desired ADOM.
2. Edit the desired NSX-T connector configuration.
3. Click Disable Server, then click OK to confirm. If the server does not become disabled, delete any service deployments deployed as part of this connector on the NSX-T Manager, then try to disable it again.
4. Ensure the Status is OFF. If it is ON, toggle the Status to OFF and click Apply & Refresh or OK.
5. Return to Fabric View. Right-click the NSX-T connector, then click Delete.