Fortinet black logo

FortiGate-7000E Handbook

Optimizing NAT IP pool allocation on FortiGate-7000E systems with empty FPM slots

Optimizing NAT IP pool allocation on FortiGate-7000E systems with empty FPM slots

FortiOS allocates IP pool addresses evenly among all of the FPMs in a FortiGate-7000E chassis. However, if the chassis has empty FPM slots, IP pool addresses are allocated to the empty slots as well as the operating slots, resulting in fewer IP addresses being available for the operating FPMs.

You can use the following command to disable the empty slots. When the empty slots are disabled, all IP pool addresses are allocated to the operating FPMs; resulting in all of the addresses in the IP pool being available.

For example, if you are operating an FortiGate-7060E with FPMs in slots 3 and 4 only, use the following command to disable slots 5 and 6:

config load-balance setting

config workers

edit 5

set status disable

next

edit 6

set status disable

end

Note

Enabling or disabling FPM slots causes the FortiGate-7000E to re-partition all NAT pools among the currently active FPMs. This might disrupt currently running sessions, so Fortinet recommends enabling or disabling FPMs during a maintenance window.

Optimizing NAT IP pool allocation on FortiGate-7000E systems with empty FPM slots

FortiOS allocates IP pool addresses evenly among all of the FPMs in a FortiGate-7000E chassis. However, if the chassis has empty FPM slots, IP pool addresses are allocated to the empty slots as well as the operating slots, resulting in fewer IP addresses being available for the operating FPMs.

You can use the following command to disable the empty slots. When the empty slots are disabled, all IP pool addresses are allocated to the operating FPMs; resulting in all of the addresses in the IP pool being available.

For example, if you are operating an FortiGate-7060E with FPMs in slots 3 and 4 only, use the following command to disable slots 5 and 6:

config load-balance setting

config workers

edit 5

set status disable

next

edit 6

set status disable

end

Note

Enabling or disabling FPM slots causes the FortiGate-7000E to re-partition all NAT pools among the currently active FPMs. This might disrupt currently running sessions, so Fortinet recommends enabling or disabling FPMs during a maintenance window.