New HA features and changes
New HA features and changes for FortiOS 6.0.6:
- Configuration synchronization, see Standalone configuration synchronization.
- HA
route_ttlsupport, see Changing how long routes stay in a cluster unit routing table.
New HA features and changes for FortOS 6.0.4:
-
FortiGate Session Life Support Protocol (FGSP) (also called standalone session sync) support. See FortiGate-6000 FGSP
-
The following HA session synchronization options are now supported for FGCP HA:
config system ha
set session-pickup {disable | enable}
set session-pickup-connectionless {disable | enable}
set session-pickup-delay {disable | enable}
set inter-cluster-session-sync {disable | enable}
end
-
The following HA session synchronization options are now supported for FGSP HA:
config system ha
set session-pickup {disable | enable}
set session-pickup-connectionless {disable | enable}
set session-pickup-expectation {disable | enable}
set session-pickup-nat {disable | enable}
end
-
If both FortiGate-6000s in a cluster are configured with the same chassis ID, the device with the lowest serial number will be shut down.