config VRRP

Description: Configure the VRRP settings.

config system interface
  edit <name>
    config vrrp
      set status [enable | disable]
      set version [2]
      set *ip {ipv4-address}
      set *id [1 – 255]
      set priority [1 – 255]
      set adv-interval [1 – 255]
      set start-time [1 – 255[
      set preempt [enable | disable]
unset
show
end
next
show
abort
end
delete <name>
purge
show
end

Sample command:

FX201E5919000057 (interface) # show
config system interface
    edit wan
        set type physical
        set status up
        set mode dhcp
        set mtu-override enable
        set mtu 1500
        set distance 5
        set vrrp-virtual-mac disable
        config vrrp
            set status enable
            set version 2
            set ip 192.168.100.25
            set id 5
            set priority 1
            set adv-interval 23
            set start-time 33
            set preempt enable
        end
        set allowaccess http https ping snmp ssh telnet
        set defaultgw enable
        set dns-server-override enable
    next
end

Parameter	Description	Type	Size	Default
status	Status of the VRRP configuration.	option	-	disable
	Option Description enable Enable the VRRP configuration. disable Disable VRRP configuration.
version	VRRP version.	integer	2	2
ip	IP address of the virtual router.	IPv4 address	-	none
id	ID of the virtual router.	integer	1 - 255	0
priority	Priority of the virtual router.	integer	1 - 255	100
adv-interval	Advertisement interval.	integer	1 - 255	1
start-time	Start-up time.	integer	1 - 255	1
preempt	Preempt mode.	option	-	disable
	Option Description enable Enable preempt mode. disable Disable preempt mode.