Get interface status
Use the following command to get system interface status:
FX511FTQ21001262 # get system interface
== [ port4 ]
name: port4 status: online/up/link up type: physical mac: 94:ff:3c:0d:1e:30 mode: static ip: 0.0.0.0/0 mtu: 1500
gateway: 0.0.0.0
== [ wan ]
name: wan status: online/up/link up type: physical mac: 94:ff:3c:0d:1e:34 mode: static ip: 10.107.41.45/24 mtu: 1500
gateway: 0.0.0.0
== [ sfp ]
name: sfp status: online/up/link down type: physical mac: 94:ff:3c:0d:1e:35 mode: dhcp ip: 0.0.0.0/0 mtu: 1500
gateway: 0.0.0.0
== [ lan ]
name: lan status: online/up/link up type: lan-switch mac: 94:ff:3c:0e:1e:30 mode: static ip: 192.168.180.45/24 mtu: 1500
gateway: 0.0.0.0
== [ lo ]
name: lo status: online/up/link up type: loopback mac: 00:00:00:00:00:00 mode: static ip: 127.0.0.1/8 mtu: 65536
gateway: 0.0.0.0
== [ lte1 ]
name: lte1 status: online/up/link up type: lte mac: ca:45:59:b1:5f:db mode: dhcp ip: 192.0.0.2/27 mtu: 1472
gateway: 192.0.0.1 dns: 192.0.0.1
== [ vwan ]
name: vwan status: online/up/link up type: virtual-wan mac: fe:f3:55:af:53:fa mode: static ip: 0.0.0.0/0 mtu: 1472
gateway: 0.0.0.0
== [ test511 ]
name: test511 status: online/up/link down type: tunnel mac: 00:00:00:00:00:00 mode: static ip: 0.0.0.0/0 mtu: 1332
gateway: 0.0.0.0