Get interface status
Use the following command to get system interface status:
get system interface
= [ lo ]
name: lo status: online/up/link up type:
loopback mac: 00:00:00:00:00:00 mode: static ip:
127.0.0.1/8 mtu: 65536 gateway: 0.0.0.0
== [ lte1 ]
name: lte1 status: online/up/link up type:
lte mac: d2:82:f4:b7:db:27 mode: dhcp ip:
10.220.139.33/30 mtu: 1500 gateway: 10.220.139.34 dns:
172.26.38.1
== [ lan ]
name: lan status: online/up/link up type:
physical mac: 70:4c:a5:fd:1a:da mode: static ip:
192.168.2.1/24 mtu: 1500 gateway: 0.0.0.0
== [ vwan1 ]
name: vwan1 status: online/up/link up type:
virtual-wan mac: d2:10:5f:ed:71:e8 mode: static ip:
0.0.0.0/0 mtu: 1364 gateway: 0.0.0.0
== [ fcs-0-phase-1 ]
name: fcs-0-phase-1 status: online/up/link up type:
tunnel mac: 00:00:00:00:00:00 mode: static ip:
0.0.0.0/0 mtu: 1364 gateway: 0.0.0.0
== [ fcs-1-phase-1 ]
name: fcs-1-phase-1 status: online/up/link up type:
tunnel mac: 00:00:00:00:00:00 mode: static ip:
0.0.0.0/0 mtu: 1364 gateway: 0.0.0.0