Create a data plan
You can configure a data plan on the FortiGate with the following parameters:
config extender-controller dataplan
edit Verizon
set modem modem1
set type by-carrier
set carrier Verizon
set apn WE01.VZWSTATIC
set auth NONE
set user
set pwd
set pdn ipv4-only
set signal-threshold 0
set signal-period 0
set capacity 0
set monthly-fee 0
set billing-date 0
set overage disable
set preferred-subnet 32
set private-network disable
next
end
|
When |
| Parameter | Description |
|---|---|
| modem | Choose “modem1”, “modem2”, or “all”. |
| type |
Choose the way for the modem to select the SIM card:
|
| iccid | The serial number of the SIM, mandatory for “set type by-iccid”.
|
| carrier | The SIM card carrier, mandatory for “set type by-carrier”.
|
| slot | The SIM card slot, mandatory for “set type by-slot”
|
| apn | The APN of the SIM card. |
| auth-type | The Authorization mode. |
| username | The username. |
|
password |
The password. |
|
pdn |
The Packet Data Network (PDN) IP address family. |
|
signal-threshold |
The signal-strength threshold beyond which SIM switch will occur. Note: Enter an integer value from <50> to <100> (default = <100>). |
|
signal-period |
The length of time (from 600 to 18000 seconds) for SIM switch to occur when signal strength remains below the set signal threshold for more than half of the set period. |
|
capacity |
The data capacity per month (from 0 to 102400000 MB). |
|
monthly-fee |
The monthly fee for the data plan (from 0 to 1000000). |
|
billing-date |
The billing date of the month. |
|
preferred-subnet |
DHCP subnet. |
|
private-network |
(Enable/disable) blocking all non-NATed traffic. |