System Routing

Use the Network > System Routing page to manage static routes of your FortiDeceptor device. All of the columns in the table are searchable and support custom filters.

The following options are available:

Create New	Create a new static route.
Edit	Edit the selected static route.
Delete	Delete the selected static route.

The following information is displayed:

IP/Mask	IP address and subnet mask.
Gateway	Gateway IP address.
Device	The interface associated with the static route.

To create a new static route:

1. Click Create New.
2. Enter the Destination IP address, Mask, and Gateway.

   You can enter the Destination IP/Mask in the format 192.168.1.2/255.255.255.0, 192.168.1.2/24, or fe80:0:0:0:0:0:c0a8:1fe.

3. Select a Device (or interface).
4. Click OK.

To edit a static route:

1. Select a Static Route
2. Click Edit.
3. Edit the destination IP address and mask, gateway, and device (or interface) as required.
4. Click OK to apply the edits to the static route.

To delete a static route or routes:

1. Select one or more Static Routes.
2. Click Delete.
3. Confirm the deletion.

To filter the columns in the table:

1. Click the plus sign in the Search field. The Filterable Columns menu opens.

   

2. Select a column in the list to Resize to Contents, Group By This column or create a custom filter.

3. Click Apply.

To show or hide columns in the table:

1. Hover the header row until the Configure Table icon appears.

   

2. Click Configure Table. The Best Fit Columns menu opens.

3. Select the columns to appear in the table and click Apply.

4. To restore the default table, click Reset Table.