System Routing
The System Routing page allows you to manage static routes on your FortiDeceptor device. Go to Network > System Routing to view the routing list.
The following options are available:
|
Create New |
Select to create a new static route. |
|
Edit |
Select a static route in the list and select Edit in the toolbar to edit the entry. |
|
Delete |
Select a static route in the list and select Delete in the toolbar to delete the entry. |
The following information is displayed:
|
IP/Mask |
|
|
Gateway |
Displays the gateway IP address. |
|
Device |
Displays the interface associated with the static route. |
|
Number of Routes |
Displays the number of static routes configured. |
To create a new static route:
- Click Create New from the toolbar.
- Enter a destination IP address, mask, and gateway in their requisite fields.
The destination IP/Mask can be entered in the format 192.168.1.2/255.255.255.0, 192.168.1.2/24, or fe80:0:0:0:0:0:c0a8:1fe.
- Select a device (or interface) from the drop-down list.
- Click OK to create the new static route.
To edit a static route:
- Select a Static Route
- Click the Edit button.
- Edit the destination IP address and mask, gateway, and device (or interface) as required.
- Click OK to apply the edits to the static route.
To delete a static route or routes:
- Select one or more Static Routes.
- Click the Delete button from the toolbar.
- Select Yes, I'm sure on the confirmation page to delete the selected route or routes.