Administrators

Use the System > Administrators page to configure administrator user accounts.

If the admin user's Admin Profile does not have Read Write privilege under System > Admin Profiles, the user can only view and edit their own information.

The following options are available:

Create New	Create a new administrator account.
Edit	Edit the selected entry.
Delete	Delete the selected entry.
Test Login	Test the selected user's login settings. If an error occurs, a debug message appears.

The following information is displayed:

Name	The administrator account name.
Type	The administrator type: Local LDAP RADIUS
Profile	The Admin Profile the user belongs to.

To create a new user:

1. Log in using an account with Read/Write access and go to System > Administrators.
2. Click Create New.
3. Configure the following:

   Administrator		Name of the administrator account. The name must be 1 to 30 characters using upper-case letters, lower-case letters, numbers, or the underscore character (_) for Local and LDAP administrators. The character limit for RADIUS server administrators is 64 characters.
   Password, Confirm Password		Password of the account. The password must be 6 to 64 characters using upper-case letters, lower-case letters, numbers, or special characters. This field is available when Type is set to Local.
   Type		Select Local, LDAP, or RADIUS.
   	LDAP Server	When Type is LDAP, select an LDAP Server. For more information, see LDAP Servers.
   	RADIUS Server	When Type is RADIUS, select a RADIUS Server. For more information, see RADIUS Servers.
   Admin Profile		Select the Admin Profile.
   Trusted Host 1, Trusted Host 2, Trusted Host 3		Enter up to three IPv4 trusted hosts. Only users from trusted hosts can access FortiDeceptor.
   Trusted IPv6 Host 1, Trusted IPv6 Host 2, Trusted IPv6 Host 3		Enter up to three IPv6 trusted hosts. Only users from trusted hosts can access FortiDeceptor.
   Comments		Enter an optional comment.

   Setting trusted hosts for administrators limits the computers an administrator can use to log into FortiDeceptor. When you identify a trusted host, FortiDeceptor only accepts the administrator’s login from the configured IP address or subnet. Attempts to log in with the same credentials from another IP address or subnet are dropped.

4. Click OK.

To edit a user account:

1. Log in using an account with Read/Write access and go to System > Administrators.
2. Select and account and click Edit.

   Only the admin user can edit its own settings.

   You must enter the old password before you can set a new password.

3. Edit the account and click OK.

To delete one or more user accounts:

1. Log in using an account with Read/Write access and go to System > Administrators.
2. Select the user account you want to delete.
3. Click Delete and confirm that you want to delete the user.

To test LDAP or RADIUS logins:

1. Log in using an account with Read/Write access and go to System > Administrators.
2. Select an LDAP or RADIUS user to test.
3. Click Test Login.
4. Enter the user password.
5. Click OK.

   If an error occurs, a debug message appears.

When a remote RADIUS server is configured for two-factor authentication, RADIUS users must enter a FortiToken code or the code from email/SMS to complete login or to test login.