LDAP Servers

FortiDeceptor supports remote authentication of administrators using LDAP servers. To use this feature, configure the server entries in FortiDeceptor for each authentication server in your network.

If you have configured LDAP support and require users to authenticate using an LDAP server, FortiDeceptor contacts the LDAP server for authentication. To authenticate with FortiDeceptor, the user enters a user name and password. FortiDeceptor sends this user name and password to the LDAP server. If the LDAP server can authenticate the user, FortiDeceptor authenticates the user. If the LDAP server cannot authenticate the user, FortiDeceptor refuses the connection.

The following options are available:

Create New	Add an LDAP server.
Edit	Edit the selected LDAP server.
Delete	Delete the selected LDAP server.

The following information is displayed:

Name	LDAP server name.
Address	LDAP server address.
Common Name	LDAP common name.
Distinguished Name	LDAP distinguished name.
Bind Type	LDAP bind type.
Connection Type	LDAP connection type.

To create a new LDAP server:

1. Go to System > LDAP Servers.
2. Click Create New.
3. Configure the following settings:

   Name		A unique name to identify the LDAP server.
   Server Name/IP		IP address or FQDN of the LDAP server.
   Port		The port for LDAP traffic. The default port is 389.
   Common Name		Common name identifier of the LDAP server. Most LDAP servers use cn. Some servers use other common name identifiers such as uid.
   Distinguished Name		Distinguished name used to look up entries on LDAP servers. The distinguished name reflects the hierarchy of LDAP database object classes above the common name identifier.
   Bind Type		The type of binding for LDAP authentication: Simple Anonymous Regular
   	Username	When the Bind Type is set to Regular, enter the user name.
   	Password	When the Bind Type is set to Regular, enter the password.
   Enable Secure Connection		Use a secure LDAP server connection for authentication.
   	Protocol	When Enable Secure Connection is selected, select LDAPS or STARTTLS.
   	CA Certificate	When Enable Secure Connection is selected, select a CA Certificate.

4. Click OK.