Saving the Vyatta source configuration files

Before starting the conversion wizard, save a copy of your Vyatta configuration file to the computer where FortiConverter is installed.

1. Use an SSH terminal and connect to the device.
2. Input command "set terminal length 0".
3. Input "show configuration all" and save the output configuration.

Please note that FortiConverter requires the structural configuration file as a valid input. For example:

firewall {

all-ping enable

broadcast-ping disable

config-trap disable

group {

address-group ADDR_GRP1 {

address 10.58.14.15

address 10.58.14.16

address 10.58.14.17

}

address-group ADDR_GRP2 {

address 10.58.186.41

address 10.58.186.52

}

............

............