Saving the PAN source configuration files

Before starting the conversion wizard:Palo Alto, save a copy of your configuration file to the computer where FortiConverter is installed.

In the web UI, go to Device > Setup > Operations, then click Export named configuration snapshot.

If the configuration is managed using Panorama shared policy configuration, you should disable shared configuration before exporting.

To disable Panorama shared configuration

1. Log in to the device you want to remove from Panorama.
2. Go to Device > Setup > Management > Panorama Settings and click Disable Panorama Policy and Object or Disable Device and Network Template.



3. Do one of the following to import the configuration from Panorama into the firewall local configuration:
   • If you clicked Disable Panorama Policy and Object, in the edit dialog box, select Import Panorama Policy and Objects before disabling and then click OK.

   

   • If you clicked Disable Device and Network Template, select Import Device and Network Template before disabling and then click OK.

     

4. Log in to the device that was removed from Panorama and go to Device > Setup > Operations > Save > Save named configuration snapshot.
5. Enter a name that helps to identify the configuration. In this example, it is pan2fg.



6. Go to Device > Setup > Operations > Export > Export the named configuration snapshot.



7. Click OK.

Select the exported file on the Source Configuration page of the Palo Alto conversion wizard.