Fortinet black logo

EMS Administration Guide

Configuring EMS settings

Configuring EMS settings

FortiClient EMS installs with a default IP address and port configured. You can change the IP address and port and configure other server settings for FortiClient EMS.

When you enable multitenancy, you must configure some EMS settings at the global level, and other settings at the site level. See Global and per-site configuration.

To configure EMS settings:
  1. Go to System Settings > EMS Settings.
  2. Configure the following options under Shared Settings. EMS uses these settings for FortiClient EMS managing Windows, macOS, and Linux endpoints, and FortiClient EMS managing Chromebook endpoints:

    Hostname

    Displays the FortiClient EMS server's hostname.

    Listen on IP

    Displays the IP addresses for the FortiClient EMS server. FortiClient connects to FortiClient EMS on the specified IP address.

    You can generate a QR code for the specified IP address. See Generating a QR code for centrally managing FortiClient (Android) and (iOS) endpoints.

    Use FQDN

    Specify an FQDN for the FortiClient EMS server.

    FortiClient's connection to EMS is critical to managing endpoint security. Managing this is relatively easy for internal devices. For external devices or devices that may leave the internal network, you must consider how to maintain this connection. FortiClient can connect to EMS using an IP address or fully qualified domain name (FQDN). An FQDN is preferable for the following reasons:

    • Easy to migrate EMS to a different IP address
    • Easy to migrate to a different EMS instance
    • Flexible to dynamically resolve the FQDN

    The third reason is particularly valuable for environments where devices may be internal or external from day to day. When using an FQDN, you can configure your internal DNS servers to resolve the FQDN to the EMS internal IP address and register your external IP address with public DNS servers. You must then configure the device with your external IP address to forward communication received on port 8013 to your EMS internal IP address. This allows your external clients to leverage a virtual IP address on the FortiGate so that they can reach EMS, while allowing internal clients to use the same FQDN to reach EMS directly.

    Alternatively, you can use a private IP address for the connection. This configuration would require external clients to establish a VPN connection to reach the EMS (VPN policies permitting). This configuration can be problematic if all endpoints need an urgent update but some are not connected to VPN at that time.

    FQDN

    Enter the FortiClient EMS server FQDN. FortiClient can connect using the specified IP address in the Listen on IP Addresses option or the specified FQDN.

    Remote HTTPS access

    Specify settings for remote administration access to FortiClient EMS.

    Turn remote HTTPS access to FortiClient EMS on and off. When enabled, enter a hostname in the Custom hostname field to let administrators use a browser and HTTPS to log into FortiClient EMS. When disabled, administrators can only log into FortiClient EMS on the server.

    HTTPS port

    Available when Remote HTTPS Access is enabled. Displays the predefined HTTPS port. You cannot change the port.

    Pre-defined hostname

    Available when Remote HTTPS Access is enabled. Displays the predefined hostname. You cannot change the name.

    Custom hostname

    Available when Remote HTTPS Access is turned on. Displays the predefined hostname of the server on which FortiClient EMS is installed. You can customize the hostname. When you change the hostname, the web server restarts.

    Redirect HTTP request to HTTPS

    Available when Remote HTTPS Access is turned on. If this option is enabled, if you attempt to remotely access FortiClient EMS at http://<server_name>, this automatically redirects to https://<server_name>.

    SSL certificate

    Displays the currently imported SSL certificate. If you have already uploaded an SSL certificate, a Replace button displays.

    Certificate

    Browse and upload a new SSL certificate file.

    Password

    Configure a new SSL password.

    EMS CA certificate (ZTNA)

    This feature requires the ZTNA or EPP license and only applies for endpoints running FortiClient 7.0.0 and later versions. See Windows, macOS, and Linux endpoint licenses.

    Displays the EMS CA certificate expiry. EMS sends this certificate to FortiOS. See FortiClient in the Security Fabric.

    Click the Revoke and Update button to revoke and update the certificate. You may want to revoke a certificate if it is compromised and can no longer be trusted. When a certificate is revoked, EMS prompts FortiOS and FortiClient with a new certificate signing request. This may affect existing connections.

    Reset Stalled Deployment Interval

    Enter number of hours after which to reset stalled deployments.

  3. Configure the following options under EMS Settings. FortiClient EMS uses these settings when managing Windows, macOS, and Linux endpoints:

    Listen on port

    Displays the FortiClient EMS server default port. You can change the port by typing a new port number. FortiClient connects using the specified port number.

    Enable TLS 1.0/1.1

    Enable TLS 1.0 and 1.1 for file downloads.

    You must enable this option when upgrading FortiClient on a Windows 7 device via FortiClient EMS.

    FortiClient download URL

    FortiClient deployment packages created in FortiClient EMS are available for download at this URL.

    Open port 10443 in Windows Firewall

    Open port 10443 or close port 10443. Port 10443 is used to download FortiClient.

    Enforce invitation-only registration for

    Select the desired endpoints to enforce invitation-only registration for. See Invitations. Modifying this setting causes any endpoints that do not meet the new setting to deregister from EMS.

    Sign software packages

    Enable this option to have Windows FortiClient software installers created by or uploaded to FortiClient EMS digitally signed with a code signing certificate.

    Timestamp server

    Enter the server address to timestamp software installers with.

    Certificate

    Upload the desired code signing certificate. This must be a .pfx file. After a certificate has been uploaded, its expiry date is also displayed.

    Password

    Enter the certificate password. This is required for FortiClient EMS to sign the software installers with the certificate.

    Enable Managed by EMS

    Select an option from the dropdown list. Users can configure this IP address in Shared Settings > Listen on IP.

    Connect to local subnets only

    Only allow connection to local subnets.

    Use connection key

    Enable the connection key endpoints can use to connect to FortiGates. Enter and reenter the connection key.

    Enable login banner

    When you enable the login banner, a message appears prior to a user logging into FortiClient EMS. In the Message field, type your message. The Preview section displays a preview of the message.

  4. If managing Chromebooks, enable EMS for Chromebooks Settings. You may need to restart FortiClient EMS after enabling this option.
  5. Configure the following options under EMS for Chromebooks Settings. These settings are used by FortiClient EMS managing Chromebook endpoints:

    Listen on port

    Displays the default port for the FortiClient EMS server for Chromebooks. You can change the port by typing a new port number. The FortiClient Web Filter extension on Chromebooks connects to FortiClient EMS using the specified port number.

    User inactivity timeout

    Enter the number of hours of inactivity after which to timeout the user.

    Profile update interval

    Specify the profile update interval (in seconds).

    SSL certificate

    Displays the SSL certificate currently imported. If you have already uploaded an SSL certificate, a Replace button displays.

    Certificate

    Browse and upload a new SSL certificate file. See Adding an SSL certificate to FortiClient EMS for Chromebook endpoints.

    Password

    Configure a new SSL password.

    Service account

    Displays the service account ID currently in use.

    Update service account

    Update the service account with new credentials.

    Reset service account

    In the event your service account is broken, you can revert back to the default service account by clicking the Reset button. This restores the default service account. You must Save the settings for the change to take effect.

    ID

    Available if the Update service account button is clicked. Enter a new service account ID.

    Private key

    Available if the Update service account button is clicked. Upload a new service account private key.

  6. Configure the following options under Endpoints Settings:

    FortiClient telemetry connection key

    Add the FortiClient Telemetry connection key for FortiClient EMS. FortiClient must provide this key during connection.

    You can generate a QR code for the specified key. See Generating a QR code for centrally managing FortiClient (Android) and (iOS) endpoints.

    Keep alive interval

    Each connected FortiClient endpoint sends a short keep-alive (KA) message to FortiClient EMS at the specified interval.

    Offline timeout

    Configure the number of KA intervals after which EMS considers the endpoint to be offline.

    Delete timeout

    Configure the number of days after which EMS deletes a deregistered endpoint. For example, if you configure this value to be 45 days, EMS deletes the endpoint 45 days after its deregistration.

    License timeout

    Configure the number of days after which EMS deregisters an endpoint.

    Automatically upload avatars

    FortiClient uploads user avatars to all FortiGates, FortiAnalyzers, and FortiClient EMS servers it is connected to.

    Enable endpoint snapshot reports

    Enable endpoint snapshot reports and enter the interval at which to take reports in seconds. The interval must be between 300 and 86400 seconds.

  7. Enable Manage Multiple Customer Sites. This enables multitenancy for EMS.
  8. Configure the following options under EMS FSSO Settings. These settings add SSL encryption to the FSSO protocol between EMS and FortiOS.

    SSL certificate

    Displays the SSL certificate currently imported. If you have already uploaded an SSL certificate, a Replace button displays.

    Certificate

    Browse and upload a new SSL certificate file.

    Password

    Configure a new SSL password.

  9. Click Save.

Configuring EMS settings

FortiClient EMS installs with a default IP address and port configured. You can change the IP address and port and configure other server settings for FortiClient EMS.

When you enable multitenancy, you must configure some EMS settings at the global level, and other settings at the site level. See Global and per-site configuration.

To configure EMS settings:
  1. Go to System Settings > EMS Settings.
  2. Configure the following options under Shared Settings. EMS uses these settings for FortiClient EMS managing Windows, macOS, and Linux endpoints, and FortiClient EMS managing Chromebook endpoints:

    Hostname

    Displays the FortiClient EMS server's hostname.

    Listen on IP

    Displays the IP addresses for the FortiClient EMS server. FortiClient connects to FortiClient EMS on the specified IP address.

    You can generate a QR code for the specified IP address. See Generating a QR code for centrally managing FortiClient (Android) and (iOS) endpoints.

    Use FQDN

    Specify an FQDN for the FortiClient EMS server.

    FortiClient's connection to EMS is critical to managing endpoint security. Managing this is relatively easy for internal devices. For external devices or devices that may leave the internal network, you must consider how to maintain this connection. FortiClient can connect to EMS using an IP address or fully qualified domain name (FQDN). An FQDN is preferable for the following reasons:

    • Easy to migrate EMS to a different IP address
    • Easy to migrate to a different EMS instance
    • Flexible to dynamically resolve the FQDN

    The third reason is particularly valuable for environments where devices may be internal or external from day to day. When using an FQDN, you can configure your internal DNS servers to resolve the FQDN to the EMS internal IP address and register your external IP address with public DNS servers. You must then configure the device with your external IP address to forward communication received on port 8013 to your EMS internal IP address. This allows your external clients to leverage a virtual IP address on the FortiGate so that they can reach EMS, while allowing internal clients to use the same FQDN to reach EMS directly.

    Alternatively, you can use a private IP address for the connection. This configuration would require external clients to establish a VPN connection to reach the EMS (VPN policies permitting). This configuration can be problematic if all endpoints need an urgent update but some are not connected to VPN at that time.

    FQDN

    Enter the FortiClient EMS server FQDN. FortiClient can connect using the specified IP address in the Listen on IP Addresses option or the specified FQDN.

    Remote HTTPS access

    Specify settings for remote administration access to FortiClient EMS.

    Turn remote HTTPS access to FortiClient EMS on and off. When enabled, enter a hostname in the Custom hostname field to let administrators use a browser and HTTPS to log into FortiClient EMS. When disabled, administrators can only log into FortiClient EMS on the server.

    HTTPS port

    Available when Remote HTTPS Access is enabled. Displays the predefined HTTPS port. You cannot change the port.

    Pre-defined hostname

    Available when Remote HTTPS Access is enabled. Displays the predefined hostname. You cannot change the name.

    Custom hostname

    Available when Remote HTTPS Access is turned on. Displays the predefined hostname of the server on which FortiClient EMS is installed. You can customize the hostname. When you change the hostname, the web server restarts.

    Redirect HTTP request to HTTPS

    Available when Remote HTTPS Access is turned on. If this option is enabled, if you attempt to remotely access FortiClient EMS at http://<server_name>, this automatically redirects to https://<server_name>.

    SSL certificate

    Displays the currently imported SSL certificate. If you have already uploaded an SSL certificate, a Replace button displays.

    Certificate

    Browse and upload a new SSL certificate file.

    Password

    Configure a new SSL password.

    EMS CA certificate (ZTNA)

    This feature requires the ZTNA or EPP license and only applies for endpoints running FortiClient 7.0.0 and later versions. See Windows, macOS, and Linux endpoint licenses.

    Displays the EMS CA certificate expiry. EMS sends this certificate to FortiOS. See FortiClient in the Security Fabric.

    Click the Revoke and Update button to revoke and update the certificate. You may want to revoke a certificate if it is compromised and can no longer be trusted. When a certificate is revoked, EMS prompts FortiOS and FortiClient with a new certificate signing request. This may affect existing connections.

    Reset Stalled Deployment Interval

    Enter number of hours after which to reset stalled deployments.

  3. Configure the following options under EMS Settings. FortiClient EMS uses these settings when managing Windows, macOS, and Linux endpoints:

    Listen on port

    Displays the FortiClient EMS server default port. You can change the port by typing a new port number. FortiClient connects using the specified port number.

    Enable TLS 1.0/1.1

    Enable TLS 1.0 and 1.1 for file downloads.

    You must enable this option when upgrading FortiClient on a Windows 7 device via FortiClient EMS.

    FortiClient download URL

    FortiClient deployment packages created in FortiClient EMS are available for download at this URL.

    Open port 10443 in Windows Firewall

    Open port 10443 or close port 10443. Port 10443 is used to download FortiClient.

    Enforce invitation-only registration for

    Select the desired endpoints to enforce invitation-only registration for. See Invitations. Modifying this setting causes any endpoints that do not meet the new setting to deregister from EMS.

    Sign software packages

    Enable this option to have Windows FortiClient software installers created by or uploaded to FortiClient EMS digitally signed with a code signing certificate.

    Timestamp server

    Enter the server address to timestamp software installers with.

    Certificate

    Upload the desired code signing certificate. This must be a .pfx file. After a certificate has been uploaded, its expiry date is also displayed.

    Password

    Enter the certificate password. This is required for FortiClient EMS to sign the software installers with the certificate.

    Enable Managed by EMS

    Select an option from the dropdown list. Users can configure this IP address in Shared Settings > Listen on IP.

    Connect to local subnets only

    Only allow connection to local subnets.

    Use connection key

    Enable the connection key endpoints can use to connect to FortiGates. Enter and reenter the connection key.

    Enable login banner

    When you enable the login banner, a message appears prior to a user logging into FortiClient EMS. In the Message field, type your message. The Preview section displays a preview of the message.

  4. If managing Chromebooks, enable EMS for Chromebooks Settings. You may need to restart FortiClient EMS after enabling this option.
  5. Configure the following options under EMS for Chromebooks Settings. These settings are used by FortiClient EMS managing Chromebook endpoints:

    Listen on port

    Displays the default port for the FortiClient EMS server for Chromebooks. You can change the port by typing a new port number. The FortiClient Web Filter extension on Chromebooks connects to FortiClient EMS using the specified port number.

    User inactivity timeout

    Enter the number of hours of inactivity after which to timeout the user.

    Profile update interval

    Specify the profile update interval (in seconds).

    SSL certificate

    Displays the SSL certificate currently imported. If you have already uploaded an SSL certificate, a Replace button displays.

    Certificate

    Browse and upload a new SSL certificate file. See Adding an SSL certificate to FortiClient EMS for Chromebook endpoints.

    Password

    Configure a new SSL password.

    Service account

    Displays the service account ID currently in use.

    Update service account

    Update the service account with new credentials.

    Reset service account

    In the event your service account is broken, you can revert back to the default service account by clicking the Reset button. This restores the default service account. You must Save the settings for the change to take effect.

    ID

    Available if the Update service account button is clicked. Enter a new service account ID.

    Private key

    Available if the Update service account button is clicked. Upload a new service account private key.

  6. Configure the following options under Endpoints Settings:

    FortiClient telemetry connection key

    Add the FortiClient Telemetry connection key for FortiClient EMS. FortiClient must provide this key during connection.

    You can generate a QR code for the specified key. See Generating a QR code for centrally managing FortiClient (Android) and (iOS) endpoints.

    Keep alive interval

    Each connected FortiClient endpoint sends a short keep-alive (KA) message to FortiClient EMS at the specified interval.

    Offline timeout

    Configure the number of KA intervals after which EMS considers the endpoint to be offline.

    Delete timeout

    Configure the number of days after which EMS deletes a deregistered endpoint. For example, if you configure this value to be 45 days, EMS deletes the endpoint 45 days after its deregistration.

    License timeout

    Configure the number of days after which EMS deregisters an endpoint.

    Automatically upload avatars

    FortiClient uploads user avatars to all FortiGates, FortiAnalyzers, and FortiClient EMS servers it is connected to.

    Enable endpoint snapshot reports

    Enable endpoint snapshot reports and enter the interval at which to take reports in seconds. The interval must be between 300 and 86400 seconds.

  7. Enable Manage Multiple Customer Sites. This enables multitenancy for EMS.
  8. Configure the following options under EMS FSSO Settings. These settings add SSL encryption to the FSSO protocol between EMS and FortiOS.

    SSL certificate

    Displays the SSL certificate currently imported. If you have already uploaded an SSL certificate, a Replace button displays.

    Certificate

    Browse and upload a new SSL certificate file.

    Password

    Configure a new SSL password.

  9. Click Save.