FortiCASB Configuration

1. Go to Overview > Shadow IT > Dashboard.
   1. Click the Connect button, located on the top right, from the Shadow IT dashboard, then click Add Device.

   

   2. In Device Setting, click Device Type drop down menu to select either FortiGate or FortiAnalyzer.

   

2. Enter the Device ID. The Device ID is the Serial Number of the FortiAnalyzer or FortiGate.

For Example, on FortiAnalyzer, the Serial Number is shown in System Setting Dashboard.



3. In OS Version, if the FortiGate or FortiAnalyzer version is 6.0 or above, select 6.0 and higher version.
4. In Protocol, select HTTP or HTTPS depending on which one is enabled in FortiAnalyzer Setting. The port will update automatically with the HTTP/HTTPS selection.



5. Click Test to test the HTTP/HTTPS connection.
6. 1. For FortiGate, click Save to finish the device setting.
   2. For FortiAnalyzer, fill in the rest of the fields, press Next, then you will be prompt to select the FortiGate device(s) (The FortiGate device you authorized in FortiAnalyzer) to add.

   

   3. Click Save to finish add device, then a summary page will be shown as below.

   

   Note: Please make sure the FAZ is shown under the Parent Device column.