Document
Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Table of Contents

What's new in this release
Introduction
Getting started with FortiAP management
- Configuring the FortiGate interface to manage FortiAP units
- Discovering, authorizing, and deauthorizing FortiAP units
- FortiAP diagnostics and tools
- Setting up a mesh connection between FortiAP units
- Data channel security: clear-text, DTLS, and IPsec VPN
Wireless network configuration
- Wireless network configuration tasks
- Setting your geographic location
- Configuring the network interface for the AP unit
- Creating a FortiAP profile
- Defining a wireless network interface (SSID)
  - Changing SSID to VDOM only
  - Airtime fairness
- Configuring security
- Defining SSID groups
- Configuring dynamic user VLAN assignment
- Configuring wireless NAC support
- Configuring user authentication
  - Custom RADIUS NAS-ID
- Configuring firewall policies for the SSID
- Configuring the built-in access point on a FortiWiFi unit
- Enforcing UTM policies on a local bridge SSID
- Configuring a Syslog profile
- Understanding Distributed Radio Resource Provisioning
  - Configuring Distributed Radio Resource Provisioning
- Translating WiFi QoS WMM marking to DSCP values
- Configuring Layer 3 roaming
  - Configuring L3 Roaming for Tunnel Mode SSIDs
  - Configuring L3 Roaming for Bridge Mode SSIDs
- Advanced Wireless Features
Access point configuration
- Network topology of managed APs
- Discovery and authorization of APs
- Register a FortiAP to FortiCloud
- FortiAP CLI access
- FortiAP Configuration mode
- FortiAP unit firmware upgrade
- Advanced WiFi controller discovery
- Wireless client load balancing for high-density deployments
- FortiAP groups
- LAN port options
- LAN port aggregation and redundancy
  - LAN port uplink redundancy without LACP
- CAPWAP
- LED options
Wireless mesh configuration
- Configuring a meshed WiFi network
- Configuring a point-to-point bridge
Hotspot 2.0 configuration
WiFi network with wired LAN configuration
- How to configure a FortiAP local bridge (private cloud-managed AP)
- How to increase the number of supported FortiAPs
- How to implement multi-processing for large-scale FortiAP management
Remote WLAN FortiAPs
Features for high-density deployments
Wireless network protection
- Wireless Intrusion Detection System
- WiFi data channel encryption
- Protected Management Frames and Opportunistic Key Caching support
- Bluetooth Low Energy scan
- Preventing local bridge traffic from reaching the LAN
- FortiAP-S and FortiAP-U bridge mode security profiles
- DHCP snooping and option-82 data insertion
- DHCP address enforcement
- Disabling console port access
- Configuring 802.1X supplicant on LAN
- Suppressing phishing SSID
Wireless network monitoring
- Monitoring wireless health and clients
- Monitoring rogue APs
- Suppressing rogue APs
- Monitoring wireless clients
- Monitoring wireless clients over IPv6 traffic
- Monitoring application usage for clients connected to bridge mode SSIDs
- Monitoring FortiAP with SNMP
- Monitoring FortiAP temperatures
- Enabling spectrum analysis
- Disable dedicated scanning on FortiAP F-Series profiles
Wireless network examples
- Basic wireless network example
- Wireless network example with FortiSwitch
- Complex wireless network example
- FortiGate WiFi controller 1+1 fast failover example
- CAPWAP hitless failover using FGCP
FortiWiFi unit as a wireless client
- FortiWiFi unit in client mode
- Configuring a FortiWiFi unit as a wireless client
WiFi maps
Support for location-based services
- Configuring location tracking
- Viewing device location data on a FortiGate unit
- Configuring FortiPresence
Support for Electronic Shelf Label systems
Troubleshooting
- FortiAP shell command
- Signal strength issues
- Throughput issues
- Client connection issues
- FortiAP connection issues
- Testing wireless network health with SAM
- Determining the coverage area of a FortiAP
- Best practices for OSI common sources of wireless issues
- Extended logging
- Packet sniffer
- Debug commands
- Disabling 802.11d for client backward compatibility
FortiAP CLI configuration and diagnostics commands
FortiAP API
Change log

FortiWiFi and FortiAP Configuration Guide

7.2.5

Download PDF

Copy Doc ID 8d4618e7-0496-11ee-8e6d-fa163e15d75b:13665

Copy Link

What's new in this release

FortiOS 7.2.5 wireless includes the following changes:

Simplify BLE iBeacon provisioning for RTLS deployments.

For more information about the FortiOS 7.2.5 wireless features, see the FortiOS Release Notes and New Features Guide.

For more information about new FortiAP, FortiAP-S, and FortiAP-W2 features, see the release information in the FortiAP Documentation Library.

Previous

Next

What's new in this release

FortiOS 7.2.5 wireless includes the following changes:

Simplify BLE iBeacon provisioning for RTLS deployments.

For more information about the FortiOS 7.2.5 wireless features, see the FortiOS Release Notes and New Features Guide.

For more information about new FortiAP, FortiAP-S, and FortiAP-W2 features, see the release information in the FortiAP Documentation Library.

Previous

Next