Fortinet white logo
Fortinet docs logo DOCUMENT LIBRARY
Fortinet white logo
Fortinet docs logo DOCUMENT LIBRARY
Products Best Practices Hardware Guides Products A-Z
Summary
By Solution
By 4D Pillars
By Cloud
Secure Networking
Unified SASE
Security Operations
Secure SD-WAN
Secure Access Service Edge (SASE)
ZTNA
LAN Edge
Identity and Access Management
Next Generation Firewall
Public Cloud
Private Cloud
FortiCloud
Secure Networking
  • Hybrid Mesh Firewall
  • NOC Management
  • LAN
  • WAN
    • More >>
    Unified SASE
  • Single Vendor SASE
  • Cloud Network Security
  • Secure Endpoint Connectivity
  • Web Application / API Protection
    • More >>
    Security Operations
  • Security Operations Automation
  • Identity
  • Early Detection & Prevention
    • More >>
    Secure Networking
  • Hybrid Mesh Firewall
  • NOC Management
  • LAN
  • WAN
  • Communication & Surveillance
    • Unified SASE
  • Single Vendor SASE
  • Secure Endpoint Connectivity
  • Cloud Network Security
  • Cloud-Native Security
  • Web Application / API Protection
    • Security Operations
  • Security Operations Automation
  • Endpoint
  • Data Protection
  • Identity
  • Email
  • Early Detection & Prevention
  • Expert Services
  • Edge Firewall
  • Orchestration & management
  • SD Branch
  • Application Delivery
  • Single Vendor SASE
  • Secure Endpoint Connectivity
  • Secure Private Access
  • Thin Edge
  • Identity
  • Application Gateway
  • Enterprise Asset Management
  • Endpoint Agent
  • Agentless Security Posture
  • Identity
  • Wireless
  • Switching
  • Identity
  • Privilege Acccess Management
  • Next Generation Firewall
  • Orchestration & management
  • Expert Services
  • All
  • All
  • Account Management
  • SAAS Management
  • SAAS Application Security
  • Managed Services
  • Platform as a service (PAAS)
  • Other SAAS Services
    • 4D Resources
    Solution Hubs
  • 4D Pillars
  • Cloud
  • Popular Solutions

    • CLI Reference

    Home FortiAnalyzer 7.4.1 CLI Reference
    7.4.1
    7.6.1
    7.6.0
    7.4.5
    7.4.4
    7.4.3
    7.4.2
    7.4.1
    7.4.0
    7.2.8
    7.2.7
    7.2.6
    7.2.5
    7.2.4
    7.2.3
    7.2.2
    7.2.1
    7.2.0
    7.0.13
    7.0.12
    7.0.11
    7.0.10
    7.0.9
    7.0.8
    7.0.7
    7.0.6
    7.0.5
    7.0.4
    7.0.3
    7.0.2
    7.0.1
    7.0.0
    6.4.15
    6.4.14
    6.4.13
    6.4.12
    6.4.11
    6.4.10
    6.4.9
    6.4.8
    6.4.7
    6.4.6
    6.4.5
    6.4.4
    6.4.3
    6.4.2
    6.4.1
    6.4.0
    6.2.13
    6.2.12
    6.2.11
    6.2.10
    6.2.9
    6.2.8
    6.2.7
    6.2.6
    6.2.5
    6.2.3
    6.2.2
    6.2.1
    6.2.0
    6.0.12
    6.0.11
    6.0.10
    6.0.9
    6.0.8
    6.0.7
    6.0.6
    6.0.5
    6.0.4
    6.0.3
    6.0.2
    6.0.1
    6.0.0
    5.6.11
    5.6.10
    5.6.9
    5.6.8
    5.6.8
    5.6.7
    5.6.7
    5.6.6
    5.6.6
    5.6.5
    5.6.5
    5.6.4
    5.6.4
    5.6.3
    5.6.3
    5.6.2
    5.6.2
    5.6.1
    5.6.1
    5.6.0
    5.6.0
    5.4.7
    5.4.6
    5.4.5
    5.4.5
    5.4.4
    5.4.4
    5.4.3
    5.4.3
    5.4.2
    5.4.2
    5.4.1
    5.4.1
    5.4.0
    5.4.0
    5.2.10
    5.2.9
    5.2.9
    5.2.7
    5.2.7
    5.2.6
    5.2.6
    5.2.5
    5.2.5
    5.2.4
    5.2.4
    5.2.3
    5.2.3
    5.2.2
    5.2.1
    5.2.0
    5.0.13
    5.0.13
    5.0.11
    5.0.11
    5.0.10
    5.0.9
    5.0.8
    5.0.7
    5.0.6
    5.0.5
    5.0.4
    5.0.3
    5.0.2
    5.0.1
    4.3.0
    4.2.0
    4.1.0
    4.0.0

    interface

    interface

    Use this command to edit the configuration of a FortiAnalyzer network interface.

    Syntax

    config system interface

    edit <port_string>

    set status {enable | disable}

    set ip <ipv4address_mask>

    set allowaccess {fabric fgfm http https https-logging ping snmp soc-fabric ssh webservice}

    set lldp {enable | disable}

    set speed {1000full | 100full | 100half | 10full | 10half | auto}

    set description <string>

    set alias <string>

    set mtu <integer>

    set type {aggregate | vlan}

    set interface <string>

    set vlanid <integer>

    set vlan-protocol {8021ad | 8021q}

    config member

    edit <interface-name>

    end

    set lacp-mode

    set lacp-speed {fast | slow}

    set min-links <integer>

    set min-links-down {administrative | operational}

    set link-up-delay <integer>

    set aggregate

    config ipv6

    set ip6-address <IPv6address prefix>

    set ip6-allowaccess {fgfm http https https-logging ping snmp ssh webservice}

    set ip6-autoconf {enable | disable}

    end

    end

    Variable

    Description

    <port>

    The port can be set to a port number such as port1, port2, port3, or port4. Different FortiAnalyzer models have different numbers of ports.

    status {enable | disable}

    Enable/disable the interface (default = enable). If the interface is disabled it does not accept or send packets. If you disable a physical interface, VLAN interfaces associated with it are also disabled.

    ip <ipv4_mask>

    Enter the interface IPv4 address and netmask. The IPv4 address cannot be on the same subnet as any other interface.

    allowaccess {fabric fgfm http https https-logging ping snmp soc-fabric ssh webservice}

    Enter the types of management access permitted on this interface. Separate multiple selected types with spaces.

    If you want to add or remove an option from the list, retype the list as required.

    lldp {enable | disable}

    Enable or disable the link layer discovery protocol (LLDP) (deafult = disable).

    speed {1000full 100full 100half 10full 10half auto}

    Enter the speed and duplexing the network port uses:

    • 100full: 100M full-duplex
    • 100half: 100M half-duplex
    • 10full: 10M full-duplex
    • 10half: 10M half-duplex
    • auto: Automatically negotiate the fastest common speed (default)

    description <string>

    Enter a description of the interface (character limit = 63).

    alias <string>

    Enter an alias for the interface.

    mtu <integer>

    Set the maximum transportation unit (68 - 9000, default = 1500).

    type {aggregate | vlan}

    Set the type of interface (default = vlan).

    interface <string>

    Set the underling interface name for the VLAN interface. This option is only available if the type is vlan.

    vlanid <integer>

    Set the VLAN ID (1 - 4094, default = 0).This option is only available if the type is vlan.

    vlan-protocol {8021ad | 8021q}

    Set the ethernet protocol of the VLAN (IEEE 802.1AD or IEEE 802.1Q, default = IEEE 802.1Q). This option is only available if the type is vlan.

    member

    Physical interfaces that belong to the aggregate or the redundant interface. This option is only available if the type is aggregate.

    lacp-mode

    Set the mode for LACP messages (default = active).

    This option is only available if the type is aggregate.

    lacp-speed {fast | slow}

    Set how often the interface sends LACP messages:

    • fast: Send LACP message every second.

    • slow: Send LACP message every 30 seconds (default).

    This option is only available if the type is aggregate.

    min-links <integer>

    Set the minimum number of aggregated ports that must be up (default = 1). This option is only available if the type is aggregate.

    min-links-down {administrative | operational}

    Action to take when less than the configured minimum number of links are active:

    • administrative: Set the aggregate administratively down.

    • operational: Set the aggregate operationally down (default).

    This option is only available if the type is aggregate.

    link-up-delay <integer>

    Set the number of milliseconds to wait before considering a link is up (default = 50). This option is only available if the type is aggregate.

    aggregate

    ipv6

    IPv6 of the interface.

    Variables for member subcommand:

    <interface-name>

    Enter the interface name.

    Variables for ipv6 subcommand:

    ip6-address <ipv6 prefix>

    IPv6 address/prefix of interface.

    ip6-allowaccess {fgfm http https https-logging ping snmp ssh webservice}

    Allow management access to the interface.

    ip6-autoconf {enable | disable}

    Enable/disable address automatic configuration (SLAAC) (default = enable).

    Example

    This example shows how to set the FortiAnalyzer port1 interface IPv4 address and network mask to 192.168.100.159 255.255.255.0, and the management access to ping, https, and ssh.

    config system interface

    edit port1

    set allowaccess ping https ssh

    set ip 192.168.110.26 255.255.255.0

    set status up

    end

    Previous
    Next

    interface

    interface

    Use this command to edit the configuration of a FortiAnalyzer network interface.

    Syntax

    config system interface

    edit <port_string>

    set status {enable | disable}

    set ip <ipv4address_mask>

    set allowaccess {fabric fgfm http https https-logging ping snmp soc-fabric ssh webservice}

    set lldp {enable | disable}

    set speed {1000full | 100full | 100half | 10full | 10half | auto}

    set description <string>

    set alias <string>

    set mtu <integer>

    set type {aggregate | vlan}

    set interface <string>

    set vlanid <integer>

    set vlan-protocol {8021ad | 8021q}

    config member

    edit <interface-name>

    end

    set lacp-mode

    set lacp-speed {fast | slow}

    set min-links <integer>

    set min-links-down {administrative | operational}

    set link-up-delay <integer>

    set aggregate

    config ipv6

    set ip6-address <IPv6address prefix>

    set ip6-allowaccess {fgfm http https https-logging ping snmp ssh webservice}

    set ip6-autoconf {enable | disable}

    end

    end

    Variable

    Description

    <port>

    The port can be set to a port number such as port1, port2, port3, or port4. Different FortiAnalyzer models have different numbers of ports.

    status {enable | disable}

    Enable/disable the interface (default = enable). If the interface is disabled it does not accept or send packets. If you disable a physical interface, VLAN interfaces associated with it are also disabled.

    ip <ipv4_mask>

    Enter the interface IPv4 address and netmask. The IPv4 address cannot be on the same subnet as any other interface.

    allowaccess {fabric fgfm http https https-logging ping snmp soc-fabric ssh webservice}

    Enter the types of management access permitted on this interface. Separate multiple selected types with spaces.

    If you want to add or remove an option from the list, retype the list as required.

    lldp {enable | disable}

    Enable or disable the link layer discovery protocol (LLDP) (deafult = disable).

    speed {1000full 100full 100half 10full 10half auto}

    Enter the speed and duplexing the network port uses:

    • 100full: 100M full-duplex
    • 100half: 100M half-duplex
    • 10full: 10M full-duplex
    • 10half: 10M half-duplex
    • auto: Automatically negotiate the fastest common speed (default)

    description <string>

    Enter a description of the interface (character limit = 63).

    alias <string>

    Enter an alias for the interface.

    mtu <integer>

    Set the maximum transportation unit (68 - 9000, default = 1500).

    type {aggregate | vlan}

    Set the type of interface (default = vlan).

    interface <string>

    Set the underling interface name for the VLAN interface. This option is only available if the type is vlan.

    vlanid <integer>

    Set the VLAN ID (1 - 4094, default = 0).This option is only available if the type is vlan.

    vlan-protocol {8021ad | 8021q}

    Set the ethernet protocol of the VLAN (IEEE 802.1AD or IEEE 802.1Q, default = IEEE 802.1Q). This option is only available if the type is vlan.

    member

    Physical interfaces that belong to the aggregate or the redundant interface. This option is only available if the type is aggregate.

    lacp-mode

    Set the mode for LACP messages (default = active).

    This option is only available if the type is aggregate.

    lacp-speed {fast | slow}

    Set how often the interface sends LACP messages:

    • fast: Send LACP message every second.

    • slow: Send LACP message every 30 seconds (default).

    This option is only available if the type is aggregate.

    min-links <integer>

    Set the minimum number of aggregated ports that must be up (default = 1). This option is only available if the type is aggregate.

    min-links-down {administrative | operational}

    Action to take when less than the configured minimum number of links are active:

    • administrative: Set the aggregate administratively down.

    • operational: Set the aggregate operationally down (default).

    This option is only available if the type is aggregate.

    link-up-delay <integer>

    Set the number of milliseconds to wait before considering a link is up (default = 50). This option is only available if the type is aggregate.

    aggregate

    ipv6

    IPv6 of the interface.

    Variables for member subcommand:

    <interface-name>

    Enter the interface name.

    Variables for ipv6 subcommand:

    ip6-address <ipv6 prefix>

    IPv6 address/prefix of interface.

    ip6-allowaccess {fgfm http https https-logging ping snmp ssh webservice}

    Allow management access to the interface.

    ip6-autoconf {enable | disable}

    Enable/disable address automatic configuration (SLAAC) (default = enable).

    Example

    This example shows how to set the FortiAnalyzer port1 interface IPv4 address and network mask to 192.168.100.159 255.255.255.0, and the management access to ping, https, and ssh.

    config system interface

    edit port1

    set allowaccess ping https ssh

    set ip 192.168.110.26 255.255.255.0

    set status up

    end

    Previous
    Next