config system time manual
Use this command to manage system time.
Before you begin:
- You must have read-write permission for system settings.
Syntax
config system time manual
set daylight-saving-time {enable|disable}
set zone <0-71>
next
end
|
daylight-saving-time |
Enable if you want the system to adjust its own clock when its time zone changes between daylight saving time (DST) and standard time. |
|
zone |
Specify the code number for the time zone where the appliance is located. |
Example
FortiADC-VM # get system time manual
daylight-saving-time: enable
zone : 4
See also