config user ldap

Use this command to configure a connection to an LDAP server that can authenticate administrator or user logins.

Basic steps:

1. Create an LDAP authentication server configuration.
2. Select the LDAP server configuration when you add administrator users or create user groups.

Before you begin:

• You must know the IP address and port used to access the LDAP server. You must know the CN and DN where user credentials are stored on the LDAP server.
• You must have read-write permission for system settings.

Syntax

config user ldap

edit <name>

set cnid <string>

set dn <string>

set port <integer>

set server <string>

set vdom <datasource>

next

end

cnid	Common name (cn) attribute for the LDAP record. For example: cn
dn	Distinguished name (dn) attribute for the LDAP record. For example: cn=John%20Doe,dc=example,dc=com
port	Port number for the server. The commonly used port for LDAP is 389.
server	IP address for the server.
vdom	Reserved for future use.