diagnose netlink interface

Use this command to display detailed network interface information, such as family, type, MTU, flags. It is similar to the shell command ifconfig.

Syntax

diagnose netlink interface list [<interface>] <Enter>

Example

FortiADC-VM # diagnose netlink interface ?

list list interface

FortiADC-VM # diagnose netlink interface list ?

<interface-name> interface name

port1 physical

port2 physical

port3 physical

port4 physical

port5 physical

port6 physical

port7 physical

port8 physical

port9 physical

port10 physical

FortiADC-VM # diagnose netlink interface list port1

if=port1 family=00 type=1 index=4 mtu=1500 link=0 primary=0

flags=up broadcast run multicast

Qdisc=pfifo_fast hw_addr=00:09:0f:09:00:01: broadcast_addr=ff:ff:ff:ff:ff:ff:

stat: rxp=6453991526227804 txp=749850502384418443 rxb=0 txb=170 rxe=363546 txe=0 rxd=0 txd=0 mc=0 collision=0

re: rxl=0 rxo=6474731918196736 rxc=5103452 rxf=1502687 rxfi=491093643 rxm=174588 175

te: txa=0 txc=0 txfi=170 txh=0 txw=363546