get router info6 bgp neighbors

Using this command to display BGP IPv6 neighbor information.

Syntax

get router info6 bgp neighbors

Example

FortiADC-VM (bgp) # get router info6 bgp neighbors

BGP neighbor is 2016::2, remote AS 101, local AS 101, internal link

BGP version 4, remote router ID 10.0.6.238

BGP state = Established, up for 00:14:57

Last read 00:00:57, hold time is 180, keepalive interval is 60 seconds

Configured hold time is 180, keepalive interval is 60 seconds

Neighbor capabilities:

4 Byte AS: advertised and received

Route refresh: advertised and received(old & new)

Address family IPv4 Unicast: advertised and received

Address family IPv6 Unicast: advertised and received

Message statistics:

Inq depth is 0

Outq depth is 0

Sent Rcvd

Opens: 14 1

Notifications: 0 2

Updates: 12 9

Keepalives: 20 17

Route Refresh: 0 0

Capability: 0 0

Total: 46 29

Minimum time between advertisement runs is 5 seconds

For address family: IPv4 Unicast

Community attribute sent to this neighbor(both)

3 accepted prefixes

For address family: IPv6 Unicast

Community attribute sent to this neighbor(both)

2 accepted prefixes

Connections established 3; dropped 2

Last reset 00:15:08, due to BGP Notification received

Local host: 2016::1, Local port: 179

Foreign host: 2016::2, Foreign port: 57424

Nexthop: 10.0.6.217

Nexthop global: 2016::1

Nexthop local: ::

BGP connection: shared network

Read thread: on Write thread: off