get system traffic-group status
Use this command to display traffic-group status.
Syntax
get system traffic-group-status detail/brief
Example
Use the following command to get detailed status information about the traffic group.
down2000D (global) # get system traffic-group-status detail
Traffic group: default
Current device node: 0
Next device node: 1
Preempt: no
Floating IP addresses: vlan1101InDris 10.76.12.110
Traffic group: trafficGrp1
Current device node: 0
Next device node: 1
Preempt: yes
Floating IP addresses: port5 10.76.76.76
Use the following command to get brief status information about the traffic group.
down2000D (global) # get system traffic-group-status brief
Traffic group: default
Current device node: 0
Next device node: 1
Traffic group: trafficGrp1
Current device node: 0
Next device node: 1