diagnose

The diagnose commands display diagnostic information that can help you troubleshoot problems. These commands do not have an equivalent in the web UI.

This chapter is a reference for the following commands:

• "diagnose antivirus quarantine" on page 1
• "diagnose debug cmdb" on page 1
• "diagnose debug cmdb" on page 1
• "diagnose debug cmdb" on page 1
• "diagnose debug enable/disable" on page 1
• "diagnose debug flow" on page 1
• "diagnose debug info" on page 1
• "diagnose debug module" on page 1
• "diagnose debug module kernel" on page 1
• "diagnose debug module fnginx" on page 1
• "diagnose debug module httproxy ssl" on page 1
• "diagnose debug timestamp" on page 1
• "diagnose hardware deviceinfo" on page 1
• "diagnose hardware ioport" on page 1
• "diagnose hardware pciconfig" on page 1
• "diagnose hardware sysinfo" on page 1
• "diagnose llb policy list " on page 1
• "diagnose netlink backlog" on page 1
• "diagnose netlink device" on page 1
• "diagnose netlink interface" on page 1
• "diagnose netlink ip/ipv6" on page 1
• "diagnose netlink neighbor/neighbor6" on page 1
• "diagnose netlink route/route6" on page 1
• "diagnose netlink tcp" on page 1
• "diagnose netlink udp" on page 1
• "diagnose server load balance dns-clients" on page 1
• "diagnose server-load-balance persistence" on page 1
• "diagnose server-load-balance session" on page 1
• "diagnose server-load-balance slb_load" on page 1
• "diagnose sniffer packet" on page 1
• "diagnose system top " on page 1
• "diagnose system vm " on page 1
• "diagnose tech-report" on page 1