Monitoring health check status
FortiADC enables you to monitor the health of server in real time directly from your desktop, as described below.
- Click Shared Resources > Health Check.
- Click the Health Check Monitor tab.
- Configure the health check monitor as described in Checking server health.
- Click Start to perform the health check. The result will show in the Monitor Information.
| Parameter | Description |
|---|---|
|
IP Address |
Enter the IP address of the remote server. |
|
Health Check |
Select the health check configuration. |
|
Port |
Enter the port number, if applicable. Note: This field is available only for health check configurations that require port numbers. |