Upgrading for FAP-U231F/U234F/U431F/U432F/U433F Support
You are required to download the image files for FAP-U231F, FAP-U234F, and FAP-U431F/U432F/U433F as they are NOT bundled in the controller image. Follow this procedure to download and install the files.
- Download the AP image file from the remote server to the controller, for example,
copy scp://download:download@<remote_server_IP>/<image_file_location>/forti-8.6-2build-7-patch-22042021135617-FAP231F-arm-generic-rpm.tar.fwlc
OR
copy scp://download:download@<remote_server_IP>/<image_file_location>/forti-8.6-1build-04-patch-24102019120556-FAP43X-arm-generic-rpm.tar.fwlc - Run the sh patch command to verify that the image file is copied successfully to the controller.
- Run the patch install <image filename> command to install the image file on the controller.
OR
Download the image file from the remote server and navigate to Maintenance > File Management > Patches > Import in the controller GUI. - Select the imported image file and click Install. This step is required only if the auto-upgrade is disabled.
After the AP image file is installed in the controller, run the upgrade ap same all command to upgrade the APs.