waf parameter-validation-rule
Use this command to configure parameter validation rules, each of which is a group of input rule entries.
To apply parameter validation rules, select them within an inline or Offline Protection profile. For details, see waf web-protection-profile inline-protection and waf web-protection-profile offline-protection.
Before you can configure parameter validation rules, you must first configure one or more input rules. For details, see waf input-rule.
You can use SNMP traps to notify you when a parameter validation rule is enforced. For details, see system snmp community.
To use this command, your administrator account’s access control profile must have either w or rw permission to the wafgrp area. For details, see Permissions.
Syntax
config waf parameter-validation-rule
edit "<rule_name>"
config input-rule-list
edit <entry_index>
set input-rule "<input-rule_name>"
next
end
next
end
| Variable | Description | Default |
|
Enter the name of a new or existing rule. The maximum length is 63 characters. To display the list of existing rules, enter:
|
No default. | |
| Enter the index number of the individual entry in the table. The valid range is 1–9,999,999,999,999,999,999. | No default. | |
|
Enter the name of an input rule to use in the parameter validation rule. The maximum length is 63 characters. To display the list of existing input rules, enter:
|
No default. |
Example
This example configures a parameter validation rule that applies two input rules.
config waf parameter-validation-rule
edit "parameter_validator1"
config input-rule-list
edit 1
set input-rule "input_rule1"
next
edit 2
set input-rule "input_rule2"
next
end
next
end