Deployment
|
Before starting procedures in this guide, make sure to complete the basic setup of the FortiVoice phone system and connect to the GUI of that system. For more details, see the FortiVoice Phone System Administration Guide. |
To deploy an FXS gateway and then manage that device with a FortiVoice phone system, review the tasks and perform the procedures listed in the following workflow:
|
Task sequence |
Description |
Procedure |
|---|---|---|
|
Perform tasks 1 to 4 on the FXS gateway. |
||
|
Task 1 |
Perform the following actions to complete the initial setup of the FXS gateway:
|
|
|
Task 2 |
Connect to the GUI of the FXS gateway. |
|
|
Task 3 |
Configure the following system settings:
|
|
|
Task 4 |
Upgrade the firmware of the FXS gateway to the latest GA release. |
|
|
Perform tasks 5 to 8 on the FortiVoice phone system, as applicable. |
||
|
Task 5 |
Add an FXS gateway. The FortiVoice phone system can auto-discover an FXS gateway when they are both on the same LAN. |
Perform one of the following procedures: |
|
Task 6 |
Apply the gateway configuration file from the FortiVoice phone system to the FXS gateway. |
|
|
Task 7 |
Verify that the FXS gateway is associated correctly with the FortiVoice phone system. |
|
|
Task 8 |
Optionally, edit a default managed extension. |
|