Verifying the configuration

After completing the procedures to set up the FortiVoice phone system and FXO gateway, use this procedure to verify the configuration.

Procedure steps

1. Verify the call flow for incoming calls from the public phone system:
   1. Make an incoming test call from the public phone system to a number attached to the phone line connected to the FXO gateway.
   2. Make sure that your FortiFone can perform the following functions:
      1. Receive the phone call.
      2. Display the caller ID correctly.
      3. Transmit and receive audio (two-way audio).
2. Verify the call flow for outgoing calls to the public phone system:
   1. Make an outgoing test call from your FortiFone using the destination number pattern defined in the outbound call routing rule on the FortiVoice phone system so the call can be forwarded to the FXO gateway.
   2. Make sure that the callee's phone can perform the following functions:
      1. Receive the phone call.
      2. Display the caller ID correctly.
      3. Transmit and receive audio (two-way audio).