Configuring branch paging settings of a survivability branch
Use this procedure to edit a survivability branch to configure branch paging settings.
Prerequisite
In the Deployment, complete tasks 1 to 11.
Procedure steps
- Connect to the GUI of the primary FortiVoice phone system at the main office.
- Go to Managed System > Survivability.
- On the Survivability Branch tab, double-click the survivability branch that you want to edit.
- Click Survivability.
- Scroll to the bottom of the page and click Branch Paging.
- Configure the following parameters:
GUI field
Description
FXO port
Enter the FXO port that the paging system is plugged in to at the branch office, if applicable.
Max duration
Enter the maximum duration for the branch paging session. When the maximum duration is reached, the branch paging session automatically ends.
The duration range is from 0 to 64800 seconds.
Number
Enter the number to engage the paging system.
For example, 0110.
Accept same branch paging
Select this option to allow all extensions at the same branch to connect to the paging system without a user privilege and complete a paging call.
Reject paging by default
Select this option to allow extensions at the same branch to connect to the paging system using a user privilege and account code, and complete a paging call.
Reject paging from other branch
Select this option to refuse paging calls from other branches.
Accept failover local paging
If the main office is down and you want to do paging from the branch office, select this option.
with authentication code: This code is not required.
- Click OK.
You have completed this procedure.
- If you selected the Accept same branch paging or Reject paging from other branch option, then go to Applying the branch paging configuration.
If you selected the Reject paging by default option, then go to Configuring an account code and user privilege for branch paging.